User manual PANASONIC TX-20LB5P

[. . . ] Increase or decrease level to enhance or minimise sharper, higher sound output. The levels of sound between the left and right speakers can be adjusted to suit your listening position. Can be adjusted independently of the TV speakers so that everyone can enjoy listening at a level comfortable for them. [. . . ] CH44 CH51 CH41 CH47 CH37 Name XYZ FTP 123 456 Lock Off Off Off Off Off Sys SC1 SC1 SC1 SC1 SC1 ABCDEFGHIJKLMNOPQRST UVWXYZ+-. 0123456789 Locking a programme channel You may wish to lock a programme channel to prevent access to it. Press the OK button to store the new setting. Note: When a programme position is locked, Direct Channel Access using the C and numeric buttons on the remote control is not available. OK Programme edit Prog. CH44 CH51 CH41 CH47 CH37 Name ABC XYZ FTP 123 456 Lock Off Off Off Off Off Sys SC1 SC1 SC1 SC1 SC1 Changing the sound system for a channel You can change the sound system used for a programme channel. Choose the required sound system: SC1 : PAL B, G, H / SECAM B, G SC2 : PAL I SC3 : PAL D, K / SECAM D, K F: SECAM L / L' Press the OK button to store the new setting. OK Programme edit Prog. CH44 CH51 CH41 CH47 CH37 Name ABC XYZ FTP 123 456 Lock Off Off Off Off Off Sys SC1 SC1 SC1 SC1 SC1 13 Tuning menu ­ Manual tuning It is possible to retune individual programme positions: MENU Press the MENU button. Access Setup menu. N OK Move to choose Tuning menu. Select the programme position to be tuned. 1 CH12 1 4 7 C 2 5 8 0 3 6 9 TV Flash at store Press repeatedly until required station is found. Manual tuning When the desired station is found, press the OK button to store. Press the EXIT button at any time to go back to watching TV. OK 02 Select Store Access Exit Return 99:21 41 Prog. Prog. EXIT Exit Note: If your VCR is connected to this TV by an RF cable only, choose programme position "0" to tune to the VCR signals. Manual tuning (via front panel) It is also possible to use the control panel buttons at the front of your TV to tune individual programme positions: Press the F button until Tuning mode is reached. Press the ­/ or +/ button to access Tuning mode. Press the TV/AV button to move between Change programme, Search and Change TV system. Press the ­/ or +/ button to change programme position or start search. When the desired station is found, press the STR button to store. Repeat above procedure to tune additional programme positions. [. . . ] Occasionally, a few non-active pixels may appear on the screen as a fixed point of blue, green, or red. Please note this does not affect the performance of your LCD. 24 Maintenance To clean this set, wipe with a soft, dry cloth. Neutral If the surfaces are extremely dirty, use a soft cloth dipped in soap-and-water solution or a detergent weak detergent solution. [. . . ]