User manual PANASONIC TX-22LX2

[. . . ] Operating Instructions N 1 4 7 C 2 5 8 0 3 6 9 Wide LCD TV Model No. TX-22LX2 The illustration shown is an image. Please read these instructions before operating your set and retain them for future reference. English TQBC0856 Welcome Dear Panasonic Customer, We hope that you have many years of enjoyment from your new TV. The Quick Start Guide section at the beginning of this instruction book will allow you to use the TV as quickly as possible. We recommend that you then read the complete instruction book, and keep it to refer to as you explore the range of advanced features that this LCD TV offers. Contents Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Warnings and Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Press the same button again to confirm your decision. Programme edit Prog. CH44 CH51 CH41 CH47 CH37 Name ABC XYZ FTP 123 456 Add Lock Off Off Off Off Off Cancel Red Green Moving a programme channel Move the cursor to the programme to be moved. Press the Yellow button. Yellow Programme edit Prog. CH44 CH51 CH41 CH47 CH37 Name ABC XYZ FTP 123 456 Lock Off Off Off Off Off Confirm Cancel Choose the new position for the programme channel. Press the Yellow button again to confirm your decision. 14 Tuning menu – Programme edit Renaming a programme channel Move to the Name column. The box at the bottom of the screen shows the character currently selected. Press the OK button to store the new name. OK Programme edit Prog. CH44 CH51 CH41 CH47 CH37 Name XYZ FTP 123 456 Lock Off Off Off Off Off ABCDEFGHIJKLMNOPQRST UVWXYZ+-. 0123456789 Locking a programme channel You may wish to lock a programme channel to prevent access to it. Press the OK button to store the new setting. Note: When a programme position is locked, Direct Channel Access using the C and numeric buttons on the remote control is not available. OK Programme edit Prog. CH44 CH51 CH41 CH47 CH37 Name ABC XYZ FTP 123 456 Lock Off Off Off Off Off Copying programme information to a recording device You can copy programme information to a compatible recording device connected to AV1 / AV2. Programme data will now be sent to the recording device(s). This might take a few seconds, depending on the number of stations stored. If the message “Feature not available” appears on the screen, the television is unable to send the programme information to the recording device(s). See the device’s instruction book for further information. Blue DOWNLOAD IN PROGRESS PLEASE WAIT Programme : 63 Remote control unavailable 15 Tuning menu – Auto setup Auto setup automatically retunes your TV. This feature is useful if, e. g. , you move house and wish to retune your TV to receive the local stations. MENU Press the MENU button. Access Setup menu. N OK Move to choose Tuning menu. 1 2 5 8 0 3 6 9 Access Tuning menu. Notes: • If you proceed with the next step all tuning data will be erased (all stations and their programme positions stored in your TV’s memory will be wiped out so the new settings can be stored). • If you exit the procedure after this point and before Auto setup is complete, no station information will be stored. Restart and complete the Auto setup procedure so that the TV is retuned. The TV will search for, locate, store and then sort into order your local stations. [. . . ] Occasionally, a few non-active pixels may appear on the screen as a fixed point of blue, green, or red. Please note this does not affect the performance of your LCD. 29 Maintenance To clean this set, wipe with a soft, dry cloth. If the surfaces are extremely dirty, use a soft cloth dipped in soap-and-water solution or a weak detergent solution. • Use eyeglass cleaner to remove stubborn dirt from the LCD. [. . . ]