User manual PANASONIC TX-24DW304

[. . . ] 7 Inserting the Batteries into the Remote. € Do not expose the TV to direct sunlight, open flames or place it near intense heat sources such as electric heaters. € Listening in excessive volumes from earphones and headphones may cause hearing loss. € Ensure that no open flame sources, such as lit candles, are placed on top of the TV. [. . . ] The TV remote is automatically able to perform the main functions after the connected HDMI source has been selected. To terminate this operation and control the TV via the remote again, press Quick Menu button on the remote, highlight the CEC RC Passthrough and set as Off by pressing Left or Right button. This feature can also be enabled or disabled under the Setup>More menu. the TV supports also ARC(Audio Return Channel) feature. This feature is an audio link meant to replace other cables between the TV and the audio system (A/V receiver or speaker system). When ARC is active, TV does not mute its other audio outputs automatically. So you need to decrease TV volume to zero manually, if you want to hear audio from connected audio device only (same as other optical or co-axial digital audio outputs). If you want to change connected device’s volume level, you should select that device from the source list. In that case volume control keys are directed to connected audio device. Note: ARC is supported only via the HDMI1 input. 5” inch (hdd with external power supply) external hard disk drives or USB memory stick to your TV by using the USB inputs of the TV. Back up the files on your storage devices before connecting them to the TV. Manufacturer will not be responsible for any file damage or data loss. MP3 Players) or USB hard disk drives/memory sticks may not be compatible with this TV. the TV supports FAT32 and NTFS disk formatting. While formatting USB hard drives which have more than 1TB (Tera Byte) storage space you may experience some problems in the formatting process. Wait a little while before each plugging and unplugging as the player may still be reading files. Failure to do so may cause physical damage to the USB player and the USB device itself. Do not pull out your drive while playing a file. You can use USB hubs with your TV’s USB inputs. External power supplied USB hubs are recommended in such a case. It is recommended to use the TV’s USB input(s) directly, if you are going to connect a USB hard disk. [. . . ] no sound • Check if the TV is muted. Press the Mute button or increase the volume to check. € Sound may be coming from only one speaker. Check the balance settings from Sound menu. [. . . ]