User manual PANASONIC TX-25W2A

[. . . ] You can then read the instructions completely and retain them for future reference. CONTENTS Warnings and Precautions . 4 Inserting the Remote Control Batteries . 24 - Tuning Menu - Shipping condition . 28 VCR and Satellite Receiver Installation . [. . . ] Select On to provide stereo sound reproduction. If Nicam Mono is being transmitted select either FM Mono (Off), Nicam Mono I (M1) or Nicam Mono II (M2). The options depend upon the signal being transmitted. If reception deteriorates it is advisable to switch to FM Mono (Off). When Nicam transmissions are not being received the sound will be FM Mono (Off) only. TV/AV Select Change Exit Treble Sound menu Volume Bass Treble Balance NICAM Mode Ambience Balance On Music On NICAM Select Change TV/AV Exit Sound menu Volume Bass Treble Balance NICAM Mode Ambience Mode The sound can be improved during Music or Speech mode by selecting the appropriate function. On Music Off Ambience Ambience provides a dynamic enhancer to simulate improved spatial effects. 16 SETUP MENU The Setup menu provides access to various advanced features and also to the Tuning menu SET UP Open the Setup menu Move to your choice Select Change Increase or decrease levels, set options or access further menus Press the TV/AV button to exit the Setup menu TV/AV Exit Setup menu TV/AV Teletext Off timer Tuning menu FASTEXT Off Teletext The Teletext option allows you to choose between FASTEXT or List mode. See page 32. Select Change Off timer Off timer will switch the TV off within a preset time which you can choose from between 0 to 90 minutes in 15 minute intervals. TV/AV Exit Setup menu Teletext Off timer Tuning menu List Off Tuning menu The Tuning menu provides an entry to many other features including Programme edit and Auto setup. See page 18. Volume correc. Volume correction (in AV mode only) allows you to adjust the volume level of individual stations. TV/AV Select Change Exit Setup menu Teletext Off timer Tuning menu FASTEXT Off 17 TUNING MENU - overview - SET UP Open the Setup menu Move to Tuning menu Select Change Access Tuning menu TV/AV Exit Setup menu Teletext Off timer Tuning menu FASTEXT Off Move to your choice Increase or decrease levels, set options or access further menus TV/AV Press the TV/AV button to exit Accessing the Programme edit menu will allow stations to be moved, added, deleted, named or locked. See page 19. TV/AV Programme edit Select Access Exit Auto setup The Auto setup menu allows you to automatically retune the TV. See page 23. Setup menu Teletext Off timer Tuning menu FASTEXT Off Access Manual tuning The Manual tuning menu allows individual programme positions to be tuned manually. See page 24. Decoder (AV2) This option is used when a decoder is connected via AV2. Set to On if a scrambled signal is to be processed by the decoder. information was not entered after Auto setup or it is necessary to alter some of the I. D. information it can be re--accessed via the Tuning menu. Open the Setup menu SET UP Move to Tuning menu Select Access TV/AV Exit Access Tuning menu Setup menu Move to Owner I. D. Teletext Off timer Tuning menu FASTEXT Off Access Access Owner I. D. 1 If the Owner I. D. has previously been set, enter the PIN NUMBER (using 0 to 9 on the remote control) followed by STR to proceed, this will take you to the NAME option. has previously been set, enter the required 4 digit Owner I. D. PIN NUMBER (using 0 to 9 on the remote control). If a 4 digit PIN NUMBER was entered above, you will be taken automatically to the NAME line. If not, move to the NAME line. CH44 STR Return TV/AV 'STR' Button Select Access Exit Store Tuning menu Programme edit Auto setup Manual tuning Decoder (AV2) Shipping condition Owner ID Off Access You now have the opportunity to enter your details and help the police crack crime see instruction book Change character Select character Exit TV/AV 'STR' Button - Store Owner ID - Change character. Repeat above until NAME, HOUSE NUMBER and POSTCODE are entered. Press again, to confirm, when asked, "Are you sure ?" The Tuning menu will be displayed. STR STR Owner ID PIN NUMBER : 1 2 3 4 NAME : K K K K K K K K K K K K K K HOUSE NO :K K K K K K K K K K K POSTCODE :K K K K K K K K K K K ABCDEFGHIJKLMNOPQRST UVWXYZ+--. 0123456789 For future reference, write your PIN Number here : TV/AV Press the TV/AV button to exit 26 AV SELECT AND SETUP The AV Select menu will allow you to choose which AV source to view TV/AV Press the TV/AV button Press the appropriate coloured remote control button(whilst the options remain on screen) The options will disappear You may wish to make adjustments in the Setup or Sound menus AV1 AV1 AV2/S AV3/S Setup menu SET UP Open the Setup menu Move to your choice TV/AV Select Change Exit Access adjustments or options Setup menu TV/AV Teletext Off timer Volume correc. FASTEXT Off Press the TV/AV button to exit Sound menu SOUND Open the Sound menu Select Adjust Move to your choice TV/AV Exit Sound menu Access adjustments or options Volume Bass Treble Balance Mode Ambience TV/AV Press the TV/AV button to exit Music Off 27 Q-LINK Q-Link allows the television to communicate with a compatible VCR For Q--Link communication to work, the TV must be connected to a VCR with the "Q--Link", "NEXTVIEWLINK", "DATA LOGIC", "Easy Link", "Megalogic" or "SMARTLINK" logo using a 'fully wired' Scart cable between the AV2 socket of the television and the appropriate socket on your VCR. [. . . ] (If in LIST mode, a `T' will appear in the current box at the bottom). Press the Yellow button to view a normal TV programme. , When the page is available, press the Yellow button to view the page. To clear the page perform one of the following : D Press SET UP . [. . . ]