User manual PANASONIC TX-26LX50P

[. . . ] OK 1 4 7 C 2 5 8 0 3 6 9 Operating Instructions N PULL TV Wide LCD TV Model No. TX-26LX50P TX-32LX50P The illustration shown is an image. Please read these instructions before operating your set and retain them for future reference. English TQB0E0121U-1 Welcome Dear Panasonic Customer, We hope that you have many years of enjoyment from your new TV. The Quick Start Guide section at the beginning of this instruction book will allow you to use the TV as quickly as possible. We recommend that you then read the complete instruction book, and keep it to refer to as you explore the range of advanced features that this LCD TV offers. Contents Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Warnings and Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Press the OK button after having adjusted some features to store the new settings. EXIT OK Adding / deleting a programme channel Move the cursor to the programme to be deleted or added. Press the Green button to add a programme channel to the programme position, or the Red button to delete one. Press the same button again to confirm your decision. Programme edit Prog. CH44 CH51 CH41 CH47 CH37 Name ABC XYZ FTP 123 456 Add Lock Off Off Off Off Off Sys SC1 SC1 SC1 SC1 SC1 Cancel Red Green Moving a programme channel Move the cursor to the programme to be moved. Press the Yellow button. Yellow Programme edit Prog. CH44 CH51 CH41 CH47 CH37 Name ABC XYZ FTP 123 456 Lock Off Off Off Off Off Confirm Sys SC1 SC1 SC1 SC1 SC1 Cancel Choose the new position for the programme channel. Press the Yellow button again to confirm your decision. Tuning a programme channel Move to the Chan. Increase or decrease the programme channel number (you will see the TV retune to the new number as you change it) or use the C button for Direct Channel Access. Press the OK button to store this change. Programme edit Prog. CH44 CH51 CH41 CH47 CH37 Name ABC XYZ FTP 123 456 Lock Off Off Off Off Off Sys SC1 SC1 SC1 SC1 SC1 C OK 13 Tuning menu ­ Programme edit Renaming a programme channel Move to the Name column. The box at the bottom of the screen shows the character currently selected. Press the OK button to store the new name. OK Programme edit Prog. CH44 CH51 CH41 CH47 CH37 Name XYZ FTP 123 456 Lock Off Off Off Off Off Sys SC1 SC1 SC1 SC1 SC1 ABCDEFGHIJKLMNOPQRST UVWXYZ+-. 0123456789 Locking a programme channel You may wish to lock a programme channel to prevent access to it. Press the OK button to store the new setting. Note: When a programme position is locked, Direct Channel Access using the C and numeric buttons on the remote control is not available. OK Programme edit Prog. CH44 CH51 CH41 CH47 CH37 Name ABC XYZ FTP 123 456 Lock Off Off Off Off Off Sys SC1 SC1 SC1 SC1 SC1 Changing the sound system for a channel You can change the sound system used for a programme channel. Choose the required sound system: SC1 : PAL B, G, H / SECAM B, G SC2 : PAL I SC3 : PAL D, K / SECAM D, K F: SECAM L / L' Press the OK button to store the new setting. OK Programme edit Prog. CH44 CH51 CH41 CH47 CH37 Name ABC XYZ FTP 123 456 Lock Off Off Off Off Off Sys SC1 SC1 SC1 SC1 SC1 Copying programme information to a recording device You can copy programme information to a compatible recording device connected to AV2 / AV4. Programme data will now be sent to the recording device(s). This might take a few seconds, depending on the number of stations stored. If the message "Feature not available" appears on the screen, the television is unable to send the programme information to the recording device(s). [. . . ] Normal Sound Weak or Distorted Sound This is a characteristic of liquid crystal panels and is not a problem. The liquid crystal panel is built with very high precision technology giving you fine picture details. Occasionally, a few non-active pixels may appear on the screen as a fixed point of blue, green, or red. Please note this does not affect the performance of your LCD. 26 Maintenance To clean this set, wipe with a soft, dry cloth. [. . . ]