User manual PANASONIC TX-26LXD6A

[. . . ] Operating Instructions Digital LCD TV TX---26LXD6A Please read these instructions before operating your set and retain them for future reference. (U. K. Standard) WELCOME Dear Panasonic Customer, Welcome to the Panasonic family of customers. We hope that you have many years of enjoyment from your new digital LCD television. This is a very advanced television; however, the Quick Start Guide will allow you to use the TV as quickly as possible. [. . . ] Enter the password again to confirm. 34 DVB Tuning Menu (DVB mode) DVB Tuning Menu provides access to DVB Tuning features. In DVB mode Press the MENU button. Move to menu option Adjust chosen option or access chosen menu Press the EXIT button at any time to go back to watching TV. MENU condition EXIT New DVB Service Found!Press OK to start Auto Setup Press EXIT ti ignore Warning Selecting Auto Setup will delete current Profile and Childlock settings DVB Auto Setup Add New Service Automatically retunes your TV. DVB stations will be located, sorted into order and stored. If you set the Child Lock PIN number, the number is required before DVB Auto Setup. You can add new DVB stations while retaining existing tuning data. When the New Services Found message appears new DVB stations are available to add to your existing DVB channel list. This TV continually scans for updated DVB services and notifies you of any changes. Set to Off if you do not wish to be informed of any updates. The signal condition function displays indications of both signal quality and signal strength for each DVB programme position. The DVB system requires that the signal condition is of good quality to provide the best picture. When viewing analogue pictures, interference such as signal reflection from nearby buildings or mountains causes "ghosting", but still provides a viewable picture. For the DVB system, interference such as this can disrupt the flow of data causing the picture to appear to be made up of large blocks, or to freeze intermittently. If the picture disappears completely, this could mean that signal condition is very poor. If this happens often, you may need to improve your aerial system to provide a better signal. Green bar Good Red bar Poor (check the aerial) New Service Message Signal Condition 35 DVB System Setup (DVB mode) The DVB System Setup menu provides access to DVB specific options. Move to DVB System Setup Access DVB System Setup Move to menu option Adjust chosen option or access chosen menu Press the EXIT button at any time to go back to watching TV. Pressing the OK button after having adjusted some features will store the setting as the default (replacing the factory setting). MENU EXIT Common Interface Module The Common Interface Module menu provides access to functions contained on a Common Interface Module inserted into the CI slot, located at the rear of the TV. See page 37. Preferred Subtitles This option allows you to select the language in which subtitles should appear (if available) when the STTL button is pressed. System Update Display Timeout This menu allows you to download new software to the television. See page 38. This option allows you to set how long the information banner stays on screen. Select from 0 (No display) to 10 seconds in 1 second increments. 36 Common Interface Module menu (DVB mode) The Common Interface Module menu provides access to software contained on Common Interface (CI) Modules. These can be inserted in the "CI" slot located at the rear of the TV. [. . . ] Playback from M. NTSC Videorecorders (VCR). Playback from NTSC Videorecorders (VCR). UHF Temperature: 5°C---35°C Humidity: 5% ---90% RH (non ---condensing) AV1 --- 21 pin socket --- Audio / Video in / out, RGB in, Q ---Link AV2 --- 21 pin socket --- Audio / Video in/out, S ---Video in, RGB in, Q ---Link. Component Y, Pb, Pr, Audio L+R 2 x RCA HDMI 1 Type A Connector 200 AV3 -- S ---Video in, RCA Audio / Video in. [. . . ]