User manual PANASONIC TX-28G1

[. . . ] Later you may read this Manual and use it for further reference. TABLE OF CONTENTS D D D D D Warnings and Precautions . D Tuning --- Automatic Tuning Process (ATP) . 2 3 4 5 5 6 7 8 9 10 11 11 12 13 13 14 15 16 17 18 18 D D D D D WARNINGS AND PRECAUTIONS ` This television set is designed to be connected to an AC 220---240 V, 50 Hz power source. ` To avoid damage that may result in an electric shock or fire do not expose the unit to rain or excessive moisture. [. . . ] Selected lines allow to select certain functions such as Off Timer. Other selected lines such as Setup menu allow you to go to another menu. By pressing button "F" you either enter the on---screen indications menu or go back to another menu. By pressing button "N" you close either the on---screen menu or the selected parameter. Button "TV/AV" is normally used to confirm the selection. 5 MAIN MENU This section shows among others how to adjust the picture quality. Press button "F" Select the required parameter Main Menu Increase or decrease the level. Contrast Brightness Colour Sharpness Tint (NTSC only) Off timer Setup Menu Select Adjust Exit Press button "N" to leave the menu. Off The level of contrast, brightness, colour and sharpness may be Brightness adjusted so as to meet the requirements of your sight. You may the level by the Colour go back to at any time set pressing manufacturer by button "N". Contrast Contrast Sharpness The line "Tint" will appear as a menu line only when a NTSC signal is Tint connected to the unit via the AV input thus allowing the tints to be adjusted. Switches off your television at the time you set from 0 to 90 minutes with 15---minute intervals. The Setup menu provides access to various advanced features and also to the Tuning menu. Off timer Setup menu 6 SETUP MENU This section gives access to other functions and the setup menu. Press button "F". Select Setup menu. Select Access Enter Setup menu. Select the required parameter. Main Menu Contrast Brightness Colour Sharpness Tint (NTSC only) Off timer Exit Off Adjust the parameter. Setup Menu Access Leave the menu by pressing button "N". Select Adjust Aspect The Aspect function will allow you to view wide---screen programs with the correct side dimensions (16:9). Return Exit Setup Menu Aspect Colour System Volume Correc. Q --- Link Tuning Menu OSD Language 4:3 On Auto Colour system Selects the colour decoding system for the programme (AV only). The VCR must be connected with a (full) SCART cable to the AV1 jack and the appropriate jack on the VCR. See the VCR Operation Manual for more detailed information. The Q---Link, NEXTVIEWLINK and other techniques allow the television to transmit to a compatible VCR the indication of the current programme irrespective of what programme is set on the VCR which greatly facilitates the programme recording process. Return Select Adjust Exit Setup Menu Aspect Colour System Volume Correc. 4:3 Auto Q --- Link Tuning Menu OSD Language On Recording the currently viewed programme Press "Direct TV Record" on the remote control unit DIRECT TV RECORD If the VCR is turned off, it will turn on after the Direct TV Record button is pressed. The VCR information will appear on the screen indicating wheather or not the programme can be recorded: VCR records set programme VCR records tuner signal VCR records TV signal The VCR records the signal from the television. You can neither change programmes nor switch off the television; if you do so the VCR will automatically stop the recording and turn off. You may switch off the television and the VCR will record in an Not recording. Tape protected from recording ordinary way The protection tab was removed from the back side of the video cassette. Examples of other indications: Not recording. No source signal. Setup Indications Transmission To ensure adequate recording the television and the VCR must have identical setup information --- see page 13. D Each time the ATP function is used, the setup data are transmitted to the VCR. Automatic Power---On/Power---Off Function Panasonic Q---Link VCRs provide you with the following functions: D If you insert the tape in the VCR and press the Play button the television will automatically turn on selecting the AV2 input, so you may view the recording. D If you turn off the television when the VCR is in the Stop mode, Fast Forward Mode or Rewind Mode, the VCR will automatically turn off. Turning Off Q---Link Function If you do not want to use the Q---Link function enter Setup Menu and set Q---Link to Off. Important Note: Not all VCRs support this type of the data transmission system. [. . . ] When the last group of the subject is reached, you can move to the next block using the yellow button. D The next HIGHER number accessible page is selected with the green button. D The next LOWER number accessible page is selected with the red button. What are the advantages? D D D D D Page selection at the touch of a coloured button. Easy to use step---by---step selection of the topical subjects. [. . . ]