User manual PANASONIC TX-28MD4

[. . . ] 28 SCART and S--Video Socket information . 32 2 WARNINGS AND PRECAUTIONS D This TV set is designed to operate on 220 -240V, 50Hz A. C. D To prevent damage which might result in electric shock or fire, do not expose this TV set to rain or excessive moisture. This TV must not be exposed to dripping or splashing water and objects filled with liquid, such as vases, must not be placed on top of or above the TV. [. . . ] Volume correction allows you to adjust the volume level of individual stations. This option is used when a decoder is connected via AV2. Set to On if a scrambled signal is to be processed by the decoder. Set to Off after use. Auto setup Manual tuning Fine tuning Colour system Volume correc. Decoder (AV2) 15 TUNING MENU - PROGRAMME EDIT The Programme edit menu allows you to edit the programme position settings Open the Setup menu Move to Tuning menu SET UP Tuning menu Access Tuning menu Move to Programme edit menu Access Programme edit menu Move to chosen programme position (eg: Prog. 3) Make required changes (see sections below) Press STR button to store changes If you have finished in the Programme edit menu, press the TV/AV button to exit STR Programme edit Auto setup Manual tuning Fine tuning Colour system Volume correc. Decoder (AV2) Access Auto Off TV/AV To delete an unwanted programme position Make sure the cursor is in the Prog. column Press the Red button on remote control Press the Red button again to confirm Programme edit Prog. Name Lock Sys 1: 2: 3: 4: 5: Delete CH41 CH44 Add XYZ ZXY Off Off Off Off Off Move SC2 SC2 SC2 SC2 SC2 TV>VCR 16 TUNING MENU - PROGRAMME EDIT To add a programme position Make sure the cursor is in the Prog. column Press the Green button Press the Green button again to confirm This blank programme can then be tuned, named, locked and be allocated your choice of TV--system Programme edit Prog. Name Lock Sys 1: 2: 3: 4: 5: Delete CH41 CH44 Add XYZ ZXY Off Off Off Off Off Move SC2 SC2 SC2 SC2 SC2 TV>VCR To move a programme to another position Make sure the cursor is in the Prog. No recording - TAPE MAY BE DAMAGED No recording - NO SOURCE AVAILABLE 22 Q-LINK To share tuning information To ensure correct recordings are made, the television and VCR should share tuning information -- see page 19. D Whenever the Auto setup (ATP) function is used, tuning data will be downloaded to the VCR. Auto Power functions With Panasonic Q--Link VCRs these additional features are available: D If you insert a tape in your VCR and press the Play button, the television will automatically switch on and select the AV2 input so you can view the tape. D If you switch off the television whilst the VCR is in Stop, Fast Forward or Rewind modes, the VCR will switch off automatically. To turn off Q-Link communication If you do not wish to use the Q--Link feature, go to the Setup menu and set the Q--Link option to "Off". Important Note: Not all VCRs support this type of data communication system. Some may support certain features, but not others. See the VCR handbook for further information. If Q--Link is inoperative, first confirm that your SCART lead is a full function type. Ask your dealer for further details. OSD LANGUAGE When you first installed the TV the On Screen Display language was set according to your choice of country. If you wish to use a different language then it can be chosen from the OSD language menu Open the Setup menu Move to the OSD language menu Access the OSD language menu Move to your choice Press the TV/AV button to select and exit TV/AV SET UP OSD language Deutsch English Français Italiano ELLHNIKA Cestina Român Polski Español Norsk Dansk Svenska Magyar Russkij Slovensky Nemacki Nederlands Suomi Türkçe Português Hrvatski Bulgarian Slovensko 23 VCR / DVD/R OPERATION The Remote Control is capable of operating some functions of selected Panasonic VCRs and DVD/R (Digital Versatile Disc) equipment. Some VCR and DVD/R equipment have different functions, so to ensure compatibility please refer to the equipment's instruction book or consult your dealer for details. DVD VCR Standby Press to switch the VCR or DVD/R to standby mode. [. . . ] Depending on the way information is transmitted, this may have to be pressed more than once to return to the main index page. 27 AUDIO / VIDEO CONNECTIONS AV Select and Setup It is possible to connect a variety of additional equipment to this TV. The following pages detail how to connect external equipment to both the front and rear of the TV. Once your equipment is connected, use the following procedure to view the input: TV/AV Press the TV/AV menu button Press the relevant on screen selector key to select the AV source you wish to view (for example, press the green button to select AV2 if you have connected a video recorder to the AV2 SCART socket). TV/AV The on screen selector keys that appear clear after a few seconds. [. . . ]