User manual PANASONIC TX-28X1

[. . . ] Later you may read this Manual and use it for further reference. TABLE OF CONTENTS D D D D D Warnings and Precautions . D Tuning --- Automatic Tuning Process (ATP) . 2 3 4 5 5 6 7 8 9 10 11 11 12 13 13 14 15 16 17 18 18 D D D D D WARNINGS AND PRECAUTIONS ` This television set is designed to be connected to an AC 220---240 V, 50 Hz power source. ` To avoid damage that may result in an electric shock or fire do not expose the unit to rain or excessive moisture. [. . . ] This button is used to save and confirm the screen menu indications. Two---digit (10 to 99) programme number selection. Teletext operation buttons (see page 15). VCR operation buttons (see page 14). 4 MAIN MENU FLOW CHART Main Menu Contrast Brightness Colour Sharpness Tint (NTSC only) Off timer Setup Menu Off / 15 / 30 / 45 / 60 / 75 / 90 Setup Menu Aspect Colour system (AV) Volume correction (AV) Q---Link Tuning Menu (TV) OSD Language Auto / 4:3 / 16:9 AUTO / PAL / SECAM / NTSC / M. NTSC Off / On OSD Language English Cestina Român Polski Magyar Russkij Slovensky Nemacki Hrvatski Bulgarian Slovensko Auto setup warning Tuning Menu ATP Manual tuning TV System Fine tuning Swap Colour system (TV) Decoder (AV) Q---Link Volume correction (TV) Child Lock Manual tuning SC1 / SC2 Swap Auto / PAL / SECAM Off / On TV / VCR Off / On Country Polska Ceská Republika Magyarország Other Auto setup searching ON ---SCREEN MENU INDICATIONS Your television set is equipped with a comprehensive menu system to be used for tuning and selection of parameters. Press button "F" to enter the menu. Buttons to be used to move across the menu and to select parameters. Select Adjust Menu headline Selected line Main Menu Contrast Brightness Colour Sharpness Tint (NTSC only) Off timer Setup Menu Exit Instructions Parameter indication Menu line Off Press button "N" to leave the menu. Some parameters such as Contrast, Brightness, Colour and Sharpness may be increased or decreased at your wish. Selected lines allow to select certain functions such as Off Timer. Other selected lines such as Setup menu allow you to go to another menu. By pressing button "F" you either enter the on---screen indications menu or go back to another menu. By pressing button "N" you close either the on---screen menu or the selected parameter. Button "TV/AV" is normally used to confirm the selection. 5 MAIN MENU This section shows among others how to adjust the picture quality. Press button "F" Select the required parameter Main Menu Increase or decrease the level. Contrast Brightness Colour Sharpness Tint (NTSC only) Off timer Setup Menu Select Adjust Exit Press button "N" to leave the menu. Off The level of contrast, brightness, colour and sharpness may be Brightness adjusted so as to meet the requirements of your sight. Leave menu by pressing button "N". OSD LANGUAGE When first setting up your television, select the OSD language to match your country selection. If you want to use another language you may select the language from the language menu. Press button "F". Select Setup menu. Select Select Return Exit Enter Setup menu. Save and leave the menu by pressing button "N". English Cestina Român Polski Magyar Hrvatski Bulgarian Slovensko Russkij Slovensky Nemacki 11 Q ---LINK The Q---Link function transmits the data from the television to the VCR. Press button "F". Leave the menu by pressing button "N". The VCR must be connected with a (full) SCART cable to the AV1 jack and the appropriate jack on the VCR. See the VCR Operation Manual for more detailed information. The Q---Link, NEXTVIEWLINK and other techniques allow the television to transmit to a compatible VCR the indication of the current programme irrespective of what programme is set on the VCR which greatly facilitates the programme recording process. Return Select Adjust Exit Setup Menu Aspect Colour System Volume Correc. 4:3 Auto Q --- Link Tuning Menu OSD Language On Recording the currently viewed programme Press "Direct TV Record" on the remote control unit DIRECT TV RECORD If the VCR is turned off, it will turn on after the Direct TV Record button is pressed. The VCR information will appear on the screen indicating wheather or not the programme can be recorded: VCR records set programme VCR records tuner signal VCR records TV signal The VCR records the signal from the television. You can neither change programmes nor switch off the television; if you do so the VCR will automatically stop the recording and turn off. [. . . ] In the Play mode you may view the picture in the backward direction at double speed. Pause/Still Press this button in the Play mode to stop the picture. Programme Number Up And Down By pressing these buttons the programme number will be increased or decreased by one position. REC Record Press this button to start recording. DIRECT TV REC Direct TV Record Press this button to start recording directly from the television. See page 12. 14 TELETEXT FUNCTION D Teletext functions may vary depending on the broadcasting companies and are only available if the selected channel is transmitting Teletext. D If button "F" is pressed in the Teletext mode the blue contrast scale will appear; press buttons "+" and "---" to change the settings. D When in Teletext mode, the volume may still be adjusted by pressing buttons "+" or "---". What is FLOF (FASTEXT)? In the FASTEXT mode four differently coloured subjects are shown at the bottom of the screen matching the colour of the buttons on your remote control unit. To access more information about one of these subjects, press the appropriately coloured button. [. . . ]