User manual PANASONIC TX-29AD70DP

[. . . ] 29 SCART and S--Video socket information . 33 2 WARNINGS AND PRECAUTIONS D This TV set is designed to operate on 220 -240V, 50Hz A. C. D To prevent damage which might result in electric shock or fire, do not expose this TV set to rain or excessive moisture. This TV must not be exposed to dripping or splashing water and objects filled with liquid, such as vases, must not be placed on top of or above the TV. D Adequate ventilation is essential to prevent failure of electrical components, we recommend that a gap of at least 5cm is left all around this television receiver even when it is placed inside a cabinet or between shelves. D WARNING : HIGH VOLTAGE !!! [. . . ] The Manual tuning menu allows individual programme positions to be tuned manually. Stations can be finely tuned using the Fine tuning adjustment. The Colour system menu allows you to decide the correct choice of transmission standard. Volume correction allows you to adjust the volume level of individual stations. This option is used when a decoder is connected via AV2. Set to On if a scrambled signal is to be processed by the decoder. Set to Off after use. Auto setup Manual tuning Fine tuning Colour system Volume correc. Decoder (AV2) 16 TUNING MENU - PROGRAMME EDIT The Programme edit menu allows you to edit the programme position settings Open the Setup menu Move to Tuning menu Access Tuning menu Move to Programme edit menu Access Programme edit menu Move to chosen programme position (eg: Prog. 3) Make required changes (see sections below) Press STR button to store changes If you have finished in the Programme edit menu, press the TV/AV button to exit STR SET UP Tuning menu Programme edit Auto setup Manual tuning Fine tuning Colour system Volume correc. Decoder (AV2) Access Auto Off TV/AV To delete an unwanted programme position Make sure the cursor is in the Prog. column Press the Red button on remote control Press the Red button again to confirm Programme edit Prog. If you wish you can switch off the TV and leave the VCR recording in the normal way. VCR recording TV source VCR is recording the programme signal from the television. You must not change programme position or switch off the TV: if you do, the VCR will automatically stop recording and switch off. No recording - TAPE IS PROTECTED The write protection tab on the back of the cassette has been removed. Examples of other messages that might be displayed are: No recording - NO TAPE No recording - VCR IS PLAYING VCR Recording VCR external No recording - ALREADY RECORDING!No recording - TAPE MAY BE DAMAGED No recording - NO SOURCE AVAILABLE 23 Q-LINK To ensure correct recordings are made, the television and VCR should share tuning information ---- see page 20. D Whenever the Auto setup (ATP) function is used, tuning data will be downloaded to the VCR. To share tuning information Auto Power functions With Panasonic Q--Link VCRs these additional features are available: D If you insert a tape in your VCR and press the Play button, the television will automatically switch on and select the AV2 input so you can view the tape. D If you switch off the television whilst the VCR is in Stop, Fast Forward or Rewind modes, the VCR will switch off automatically. To turn off Q-Link communication If you do not wish to use the Q--Link feature, go to the Setup menu and set the Q--Link option to "Off". Important Note: Not all VCRs support this type of data communication system. Some may support certain features, but not others. See the VCR handbook for further information. If Q--Link is inoperative, first confirm that your SCART lead is a full function type. Ask your dealer for further details. OSD LANGUAGE When you first installed the TV the On Screen Display language was set according to your choice of country. [. . . ] D Press TV/TEXT to return to normal TV operation. Sub Coded Page Access INDEX Index Press INDEX to return to the main index page. Depending on the way information is transmitted, this may have to be pressed more than once to return to the main index page. 28 AUDIO / VIDEO CONNECTIONS AV Select and Setup It is possible to connect a variety of additional equipment to this TV. The following pages detail how to connect external equipment to both the front and rear of the TV. Once your equipment is connected, use the following procedure to view the input: TV/AV Press the TV/AV menu button Press the relevant on screen selector key to select the AV source you wish to view (for example, press the green button to select AV2 if you have connected a video recorder to the AV2 SCART socket). [. . . ]