User manual PANASONIC TX-320

[. . . ] ® VersioTM EB-TX320 Digital Multi-Network Phone Operating Instructions Before operating this phone, please read these instructions completely and save this manual for future use. Charge battery before operation. Contents Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vii About This Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vii Icons Used in This Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Low battery (flashes). Indicates New text message received. When icon is darkened, indicates that text message storage is full. When blinking, the original call has been put on hold. Incoming signal strength (varies by the number of bars shown beside the signal icon): Five bars indicate a strong signal. Display area (shows numbers, text, and symbols). From standby, press to enter the Main Menu. The function changes depending on the features or modes you are using. From standby, press to access the Phonebook. Also changes to softkey functions. 10 Getting Started Chapter 2 Icon Indicates Press the Navigation key to move in the directions indicated by the displayed arrows. · The up arrow indicates that you can scroll up through a menu selection list. · The down arrow indicates that you can scroll down through a menu selection list. · The solid right arrow indicates that you can move forward through a lengthy text display. · The solid left arrow indicates that you can scroll back to the start of a lengthy text display. · The hollow right arrow indicates that you can move forward to the next screen. · The hollow left arrow indicates that you can move back to the previous screen. In menu displays, an asterisk next to a menu item indicates the current setting. Phonebook Icons The following icons appear next to Phonebook entries to indicate whether a phone number is a work number, home number, cell phone number, etc. Icon Indicates Home phone number. Location # in memory where phone number is stored. Powering Phone On and Off Powering ON Press and hold · · · until a tone sounds and the backlight lights. The battery indicator and signal icon are displayed. If your Welcome Screen is turned on, the message briefly appears. Your wireless service provider's name is displayed if you are within the coverage area. Powering OFF Press and hold to power off your phone. Getting Started 11 Chapter 2 Standby Display The standby display appears when your phone is on and in an "idle" state. You can return to the standby display at any time (except during a call) by pressing or by pressing and holding . The backlight turns on automatically for 15 seconds when you power up the phone or when you press any key. Note: The backlight remains on when the phone is plugged into a DC Adapter. Moving through the Menu You access the Main Menu from the standby display: MENU is displayed on the bottom left side of the display. [. . . ] (To change the search method setting, see "Selecting a Phonebook Search Method" on page 34. ) 3 Enter the name, a portion of the name, or the memory location number and press (FIND or OK). Note: If you do not enter anything for the first or last name, the display goes to the first letter of the alphabet for which you have a Phonebook entry. Phonebook Features 33 Chapter 5 4 5 Press Press or to scroll to the entry you want to edit or delete. (OPTION). · You have the option to Edit the entry, delete all of the information in that memory location (Delete Entry), or Exit and return to standby. 6 Scroll to the action you want to perform, and press · (OK). · · If you select Edit, all stored information for the entry is displayed. Scroll to the information you want to edit, press (SELECT), and enter the change. Repeat until all necessary changes have been made. [. . . ]