User manual PANASONIC TX-32C300B

[. . . ] 6 Inserting the Batteries into the Remote. € Do not expose the TV to direct sunlight, open flames or place it near intense heat sources such as electric heaters. € Listening in excessive volumes from earphones and headphones may cause hearing loss. € Ensure that no open flame sources, such as lit candles, are placed on top of the TV. [. . . ] This feature can also be enabled or disabled under the Setup>More menu. the TV supports also ARC(Audio Return Channel) feature. This feature is an audio link meant to replace other cables between the TV and the audio system (A/V receiver or speaker system). When ARC is active, TV does not mute its other audio outputs automatically. So you need to decrease TV volume to zero manually, if you want to hear audio from connected audio device only (same as other optical or co-axial digital audio outputs). If you want to change connected device’s volume level, you should select that device from the source list. In that case volume control keys are directed to connected audio device. Note: ARC is supported only via the HDMI1 input. System Audio Control Allows an Audio Amplifier/Receiver to be used with the TV. The volume can be controlled using the remote control of the TV. To activate this feature set the Speakers option in the Setup>More menu as Amplifier. The TV speakers will be muted and the sound of the watched source will be provided from the connected sound system. Note: The audio device should support System Audio Control feature and CEC option should be set as Enabled. English - 12 - TV Menu Contents Picture Menu Contents Mode Contrast Brightness Sharpness Colour Energy Saving Backlight Advanced Settings Dynamic Contrast Noise Reduction Colour Temp White Point You can change the dynamic contrast ratio to desired value. You can change the picture mode to suit your preference or requirements. Picture mode can be set to one of these options: Cinema, Game, Sports, Dynamic and Natural. Adjusts the light and dark values on the screen. Adjusts the brightness values on the screen. Sets the sharpness value for the objects displayed on the screen. Sets the colour value, adjusting the colours. For setting the Energy Saving to Custom, Minimum, Medium, Maximum, Auto, Picture Off or Off. Note: Available options may differ depending on the selected Mode. [. . . ] If you do experience such a problem please contact your dealer and also the manufacturer of the source equipment. English - 19 - Supported File Formats for USB Mode Media Video Extension . Srt Sub1, Sub2, Sub3 English - 20 - Supported DVI Resolutions When connecting devices to your TV’s connectors by using DVI converter cable(DVI to HDMI cable - not supplied), you can refer to the following resolution information. 56Hz 640x400 640x480 800x600 832x624 1024x768 1152x864 1152x870 1280x768 1360x768 1280x960 1280x1024 1400x1050 1440x900 1600x1200 1680x1050 1920x1080 1920x1200 60Hz 66Hz 70Hz 72Hz 75Hz þ þ þ þ þ þ þ þ þ þ þ þ þ þ þ þ þ þ þ þ þ þ þ þ þ þ þ þ þ þ þ þ þ þ þ English - 21 - Important Instruction For your own safety read following instruction carefully before attempting to connect this unit to the mains supply. [. . . ]