User manual PANASONIC TX-32LX1T

[. . . ] 3 Fitting remote control batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 How to use the LCD stand. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Make required change, e. g. , moving a programme channel (see the relevant procedure below). Press the EXIT button at any time to go back to watching TV. Press the OK button after having adjusted some features to store the new settings. EXIT OK Adding / deleting a programme channel Move the cursor to the programme to be deleted or added. Press the Green button to add a programme channel to the programme position, or the Red button to delete one. Press the same button again to confirm your decision. Programme edit Prog. CH44 CH51 CH41 CH47 CH37 Name ABC XYZ FTP 123 456 Add Lock Off Off Off Off Off Sys SC1 SC1 SC1 SC1 SC1 Cancel Red Green Moving a programme channel Move the cursor to the programme to be moved. Press the Yellow button. Yellow Programme edit Prog. CH44 CH51 CH41 CH47 CH37 Name ABC XYZ FTP 123 456 Lock Off Off Off Off Off Confirm Sys SC1 SC1 SC1 SC1 SC1 Cancel Choose the new position for the programme channel. Press the Yellow button again to confirm your decision. Tuning a programme channel Move to the Chan. Increase or decrease the programme channel number (you will see the TV retune to the new number as you change it) or use the C button for Direct Channel Access. Press the OK button to store this change. Programme edit Prog. Once this operation is completed the TV will display the programme now stored on programme position 1. Press the EXIT button at any time to go back to watching TV (please read the Notes in the above procedure). EXIT WARNING All current tuning data will be erased Start ATP Exit Return Country OK Deutschland Österreich France Italia España Portugal Nederland Danmark Sverige Norge Suomi Belgium Schweiz ELLADA Polska Ceská republika Magyarország E. Eu CH12 AUTO SETUP IN PROGRESS SEARCHING : PLEASE WAIT 02 99 :21 41 Exit Return 15 Tuning menu ­ Manual tuning It is possible to retune individual programme positions: MENU Press the MENU button. OK Move to choose Setup menu. Select the programme position to be tuned. Press repeatedly until required station is found. When the desired station is found, press the OK button to store. Press the EXIT button at any time to go back to watching TV. OK CH12 TV 1 4 7 C 2 5 8 0 3 6 9 N 1 Manual tuning 02 99:21 Search down/up Store Exit Return 9 Direct entry 41 EXIT C 0 Note: If your VCR is connected to this TV by an RF cable only, choose programme position "0" to tune to the VCR signals. Manual tuning (via control panel) It is also possible to use the control panel buttons on the top of your TV to tune individual programme positions: Press the F button until Tuning mode is reached. Press the ­/ or +/ button to access Tuning mode. Press the TV/AV button to move between Change programme, Search and Change TV system. Press the ­/ or +/ button to change programme position or start search. When the desired station is found, press the STR button to store. Repeat above procedure to tune additional programme positions. [. . . ] Picture / Sound controls set at minimum levels. Check if in Standby mode. Normal Picture No Picture No Sound Colour controls set at minimum levels. No Colour Normal Sound Retune Channel (s). Poor or Distorted Picture Weak or No Sound Sound reception may have deteriorated. [. . . ]