User manual PANASONIC TX-32LX1V

[. . . ] Operating Instructions N 1 4 7 C 2 5 8 0 3 6 9 LCD TV Model No. TX-26LX1F TX-32LX1F TX-26LX1P TX-32LX1P Please read these instructions before operating your set and retain them for future reference. English TQBC0697-1 Welcome Dear Panasonic Customer, We hope that you have many years of enjoyment from your new TV. The Quick Start Guide section at the beginning of this instruction book will allow you to use the TV as quickly as possible. We recommend that you then read the complete instruction book, and keep it to refer to as you explore the range of advanced features that this LCD TV offers. Contents Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Warnings and Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] What You See Is What You Record (DIRECT TV RECORDING) This will allow the immediate recording of the programme currently shown on the TV, by the recording 1 2 3 device attached to the Scart terminal, which can be chosen using "Q-Link". 4 5 6 Press the DIRECT TV REC button. DIRECT TV REC 7 C 8 0 9 If the recording device is in Standby mode with usable recording media inserted, it will automatically switch on when you press the DIRECT TV REC button. If a "Q-Link" device is connected, a message will appear on the TV screen showing what is being recorded, or if it is not possible to record. Some "Q-Link" compatible devices will only display the message when on the VCR programme position(0) or in AV mode. Refer to the device's instruction book. TV Recording in progress The recording device is recording the programme signal from its own tuner. If you wish you can switch off the TV and leave the device recording in the normal way. No recording -Check tape or disc The tape or disc may have been "write protected", missing or may be damaged. Refer to the device's instruction book. Additionally, when using a "Q-Link" device the main features possible are the following : The following features are only available from the device connected to the Scart terminal selected using "Q-Link". TV / Recording device Auto Power On If you insert pre-recorded media into the recording device and press the Play button whilst the TV is in Standby mode, the TV will automatically switch on and select the correct AV input so that you can view the content. Recording device Auto Power Standby When the TV is switched into Standby mode, the recording device will also switch into Standby mode if there is no media inserted, or if there is media inserted and the device is in Rewind or Stop mode. If a VCR is rewinding a tape, it will not switch into Standby mode until rewinding has finished. Recording device Image View On If the TV is in Standby mode and the recording device sends a menu to be displayed on the TV screen (e. g. , Main menu), the TV will automatically switch On and the menu will be displayed. Some other devices may support this feature. Refer to the device's instruction book. This TV will also communicate with other recording device's that bear the following logos : · "DATA LOGIC" (a trademark of Metz Corporation) · "Megalogic" (a trademark of Grundig Corporation) · "Easy Link" (a trademark of Philips Corporation) · "SMARTLINK" (a trademark of Sony Corporation) Important Note: These recording devices may support some or all of the above functions. Not all recording devices support this type of data communication system. Somemay support certain features, but not others. Refer to the device's instruction book. Some features are only available from the device connected to the Scart terminal selected using "Q-Link". If Q-Link is inoperative, first confirm that your Scart cable is a "fully wired" type. Ask your dealer for further details. 17 Aspect Controls The Widescreen TV will allow you to enjoy viewing the picture at its optimum size and aspect, including widescreen cinema format pictures. Press the ASPECT button repeatedly to move through the eight aspect options: Panasonic Auto, 16:9, 14:9, Just, 4:3, Zoom1, Zoom2 and Zoom3 OR Press the ASPECT button. Whilst the on screen selector keys are displayed, use the Red or Green buttons to move in either direction through the eight aspect options. ASPECT OK N 1 4 7 C 2 5 8 0 3 6 9 Red Green Panasonic Auto Panasonic Auto determines the best aspect ratio to use to fill your screen. [. . . ] Normal Picture No Sound TV set to AV mode. Picture / Sound controls set at minimum levels. Check if in Standby mode. No Picture No Sound Colour controls set at minimum levels. No Colour Normal Sound Retune Channel (s). [. . . ]