User manual PANASONIC TX-32LX6F

[. . . ] Operating Instructions Wide LCD TV Model No. TX-26LX6F TX-32LX6F Please read these instructions before operating your set and retain them for future reference. English Dear Panasonic Customer, We hope that you have many years of enjoyment from your new TV. The Quick Start Guide section at the beginning of this instruction book will allow you to use the TV as quickly as possible. We recommend that you then read the complete instruction book, and keep it to refer to as you explore the range of advanced features that this LCD TV offers. Contents Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Warnings and Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] CH44 CH51 CH41 CH47 CH37 Name ABC XYZ FTP 123 456 Lock Off Off Off Off Off Sys SC1 SC1 SC1 SC1 SC1 Copying programme information to a recording device You can copy programme information to a compatible recording device connected to AV1 / AV2. Programme data will now be sent to the recording device(s). This might take a few seconds, depending on the number of stations stored. If the message "Feature not available" appears on the screen, the television is unable to send the programme information to the recording device(s). See the device's instruction book for further information. Note: This is not available when you choose Q-Link Off in Setup menu. DOWNLOAD IN PROGRESS PLEASE WAIT Blue Programme : 63 Remote control unavailable 14 Tuning menu ­ Auto setup Auto setup automatically retunes your TV. This feature is useful if, e. g. , you move house and wish to retune your TV to receive the local stations. Access Tuning menu. N MENU OK 1 4 7 C 2 5 8 0 3 6 9 Move to choose Auto setup. Press to confirm start. OK TV Notes: · If you proceed with the next step all tuning data will be erased (all stations and their programme positions stored in your TV's memory will be wiped out so the new settings can be stored). · If you exit the procedure after this point and before Auto setup is complete, no station information will be stored. Restart and complete the Auto setup procedure so that the TV is retuned. Select your country. WARNING All current tuning data will be erased Start ATP Exit Return Country Press to start Auto setup. The TV will search for, locate, store and then sort into order your local stations. If compatible recording device is connected via the AV1 / AV2 terminal, programme data will be sent to the device via Q-Link. Once this operation is completed the TV will display the programme now stored on programme position 1. Press the EXIT button at any time to go back to watching TV (please read the Notes in the above procedure). OK Deutschland Österreich France Italia España Portugal Nederland Danmark Sverige Norge Suomi Belgium Schweiz ELLADA Polska Ceská republika Magyarország E. Eu CH12 AUTO SETUP IN PROGRESS SEARCHING : PLEASE WAIT 02 99 :21 41 EXIT Exit Return 15 Tuning menu ­ Manual tuning It is possible to retune individual programme positions: MENU Press the MENU button. OK Move to choose Setup menu. Select the programme position to be tuned. CH12 TV 1 4 7 C 2 5 8 0 3 6 9 N 1 Press repeatedly until required station is found. Manual tuning When the desired station is found, press the OK button to store. Press the EXIT button at any time to go back to watching TV. OK 02 99:21 Search down/up Store Exit Return 9 Direct entry 41 EXIT C 0 Note: If your VCR is connected to this TV by an RF cable only, choose programme position "0" to tune to the VCR signals. Manual tuning (via control panel) It is also possible to use the control panel buttons on the top of your TV to tune individual programme positions: Press the F button until Tuning mode is reached. Press the ­/ or +/ button to access Tuning mode. Press the TV/AV button to move between Change programme, Search and Change TV system. Press the ­/ or +/ button to change programme position or start search. When the desired station is found, press the STR button to store. [. . . ] Occasionally, a few non-active pixels may appear on the screen as a fixed point of blue, green, or red. Please note this does not affect the performance of your LCD. Turn the power supply of the TV and connected equipment off then turn on. Check compatibility of input signal from the connected equipment. [. . . ]