User manual PANASONIC TX-33A1

[. . . ] 4 Inserting the Remote Control Batteries . 28 VCR and Satellite Receiver Installation . 34 Via the front 4 pin S ---Video AV3, RCA Audio / Video and Headphone sockets . 34 Scart and S--Video socket information . [. . . ] Balance affects the levels of sound between the left and right speakers. Adjustment can be made so that the level from the speakers will suit your listening position. Select On to provide stereo sound reproduction. If Nicam Mono is being transmitted select either FM Mono (Off), Nicam Mono I (M1) or Nicam Mono II (M2). The options depend upon the signal being transmitted. If reception deteriorates it is advisable to switch to FM Mono (Off). When Nicam transmissions are not being received the sound will be FM Mono (Off) only. TV/AV Select Change Exit Treble Sound menu Volume Bass Treble Balance NICAM Mode Ambience Balance On Music On NICAM Select Change TV/AV Exit Sound menu Volume Bass Treble Balance NICAM Mode Ambience Mode The sound can be improved during Music or Speech mode by selecting the appropriate function. On Music Off Ambience Ambience provides a dynamic enhancer to simulate improved spatial effects. 17 SETUP MENU The Setup menu provides access to various advanced features and also to the Tuning menu SET UP Open the Setup menu Move to your choice Select Change Increase or decrease levels, set options or access further menus Press the TV/AV button to exit the Setup menu Setup menu TV/AV Teletext Off timer Flicker reduction Q-Link Tuning menu TV/AV FASTEXT Off On On Exit Teletext The Teletext option allows you to choose between FASTEXT or List mode. See page 32. Select Change Off timer Off timer will switch the TV off within a preset time which you can choose from between 0 to 90 minutes in 15 minute intervals. Setup menu Teletext Off timer Flicker reduction Q-Link Tuning menu TV/AV List Off On On Exit Flicker reduction You will normally find that Flicker reduction is best set to On to reduce any slight picture movement. However, it is possible that some occasional broadcasts may benefit by selecting the Off position. Select Q-Link Q--Link allows you to enable or disable data communication with a compatible VCR. See page 28. Change Setup menu Teletext Off timer Flicker reduction Q-Link Tuning menu TV/AV List Off On Off Exit Tuning menu The Tuning menu provides an entry to many other features including Programme edit and Auto setup. See page 19. 18 TUNING MENU - overview - Open the Setup menu SET UP Move to Tuning menu Select Change Access Tuning menu Setup menu Teletext Off timer Flicker reduction Q-Link Tuning menu TV/AV FASTEXT Off On On Exit Move to your choice Increase or decrease levels, set options or access further menus Press the TV/AV button to exit TV/AV Programme edit Accessing the Programme edit menu will allow stations to be moved, added, deleted, named or locked. Decoder (AV2) Owner ID Access Move to Manual tuning Off Access Manual tuning Select the programme position to be tuned Press repeatedly until required station is found 1 CH44 Programme down/up Search down/up Exit Store Return STR TV/AV 'STR' Button When the desired station is found, press STR to store. The programme position will flash Press the TV/AV button to exit Manual tuning TV/AV 01 99:21 41 Manual tuning (Front panel) Press the F button (Front panel) until "Tuning mode" is reached Press the - or + button to access Tuning mode Press the TV/AV button to move between "Change programme" and "Search" Press the - or + button to change programme position or start search When the desired station is found, press STR to store. The programme position will flash Repeat above procedure to tune additional programmes or press the F button to exit - /v F 1 CH44 Manual tuning (Front panel) TV/AV --, + TV/AV STR F 01 STR STR : : : : Search Move cursor To store To exit 99:21 F --/V +/ TV/AV 41 - /v F 25 TUNING MENU - OWNER I. D. allows you to enter a security code and address information so that in the unfortunate event of theft it will help the Police to determine the owner. information was not entered after Auto setup or it is necessary to alter some of the I. D. information it can be re--accessed via the Tuning menu. Open the Setup menu SET UP Move to Tuning menu TV/AV Select Access Access Tuning menu Exit Setup menu Teletext Off timer Flicker reduction Q-Link Tuning menu FASTEXT Off On On Access Move to Owner I. D. Access Owner I. D. 1 If the Owner I. D. has previously been set, enter the PIN NUMBER (using 0 to 9 on the remote control) followed by STR to proceed, this will take you to the NAME option. has previously been set, enter the required 4 digit Owner I. D. PIN NUMBER (using 0 to 9 on the remote control). If a 4 digit PIN NUMBER was entered above, you will be taken automatically to the NAME line. If not, move to the NAME line. CH44 STR Return TV/AV 'STR' Button Select Access Exit Store Tuning menu Programme edit Auto setup Manual tuning Fine tuning Volume correc. D Decoder (AV2) Owner ID Off Access You now have the opportunity to enter your details and help the police crack crime see instruction book Change character Select character Exit TV/AV 'STR' Button - Store Owner ID - Change character. [. . . ] (If in LIST mode, a `T' will appear in the current box at the bottom). Press the Yellow button to view a normal TV programme. , When the page is available, press the Yellow button to view the page. To clear the page perform one of the following : D Press SET UP . [. . . ]