User manual PANASONIC TX-50AS500B

[. . . ] Note : Follow the on screen instructions for operating the related features. To operate your TV in extreme ambient conditions may cause damage of the device. IMPORTANT - Please read these instructions fully before installing or operating WARNING: Never let people (including children) with reduced physical, sensory or mental capabilities or lack of experience and / or knowledge use electrical devices unsupervised. € For ventilation purposes, leave a free space of at least 10 cm all around the set. [. . . ] Note: Searching duration will change depending on the selected search step. 5” inch (hdd with external power supply) external hard disk drives or USB memory stick to your TV by using the USB inputs of the TV. Media Playback via USB Input First Time Installation When turned on for the first time, the language selection screen is displayed. Select the desired language and press OK. On the next screen, set your preferences using the navigation buttons and when finished, press OK to continue. Note: Depending on the Country selection you may be asked to set and confirm a PIN at this point. You have to enter it if you are asked to enter a PIN for any menu operation later. You can activate Store Mode option at this point. This option is intended only for store use. This option will be available in Other Settings menu and can be turned off/on later. If Home Mode is selected, Store Mode will not be available after the First Time Installation. Skin tone can be changed between -5 and 5. You can configure the colour temperature values using the RGB Gain feature. Resets the picture settings to factory default settings. This item shifts the image horizontally to the right hand side or left hand side of the screen. This item shifts the image vertically towards the top or bottom of the screen. Dot Clock adjustments correct the interference that appear as vertical banding in dot intensive presentations like spreadsheets or paragraphs or text in smaller fonts. Depending on the resolution and scan frequency that you input to the TV set, you may see a hazy or noisy picture on the screen. In such a case you can use this item to get a clear picture by trial and error method. While in VGA (PC) mode, some items in Picture menu will be unavailable. Instead, VGA mode settings will be added to the Picture Settings while in PC mode. English - 10 - Sound Menu Contents Volume Equalizer Balance Adjusts the volume level. [. . . ] Remote control - does not operate • The batteries may be exhausted. Input sources - can not be selected • If you cannot select an input source, it is possible that no device is connected. If not • Check the AV cables and connections if you have tried to connect a device. English - 14 - PC Input Typical Display Modes The following table is an illustration of some of the typical video display modes. [. . . ]