User manual PANASONIC TX-51P15H

[. . . ] This is a combined Operating Instruction manual for all the above series of models. Please read these instructions before operating your set and retain them for future reference. Welcome to the Panasonic family of customers. We hope that you will have many years of enjoyment from your new colour television set. [. . . ] Push and hold the Volume Up "+" or Down "-" button until the clear picture is received. Cancelling previously adjusted (manually) fine tuning, means re-activating the AFC (Automatic Frequency Control) Function, also know as AFT (Automatic Fine Tuning). Select the "AFC OFF" Programme Number which you want to return to Automatic Frequency Control (cancel the manual fine tuning). "AFC OFF" Programme Numbers are indicated to you by the " " symbol to the left of the Programme Numbers in the On-Screen Display. (In other words, manually tune away from the transmission, and then back to it. Game button Push this button to change to the AV2 input signal and enter Game mode. The picture and sound changes to a suitable mode for video games. Note: When you push this button during stand-by mode, the TV will turn on automatically and Picture and Sound changes to a suitable mode for video games. Off Timer button The TV set may be preset to switch to stand-by after a fixed period. By pushing "Off-Timer" button, you can select the preset time; either "30", "60", "90" minutes or AUTO mode. Sound Mute button Push this button to mute the sound completely. If the set is not switched off when the TV station stops broadcasting, it will automatically go to Stand-by mode after 5 minutes. Note: Off-Timer setting will not operate in AUTO mode when the Television set is in AV mode. Push the button once again to restore the previous sound level, and cancel the mute. This function is used only in the TV mode, and is not applicable in AV mode when the sound is not clear or no sound is produced on a Programme Number. Push the Volume Up "+" or Down "-" button repeatedly until the optimum sound is obtained. Note: These are different sound broadcast transmission systems applicable to differing countries. If a clear picture with current colours cannot be obtained when a Broadcast or AV signal is received. (In AV mode it is only necessary to push the "PRE. Push the Volume Up "+" or Down "-" button repeatedly until the optimum image is produced. 43 is a trick playback mode used in special VCR's to playback NTSC recorded video tapes through PAL television equipment. By pushing the PIP button to view the following PIP conditions. [. . . ] After completion of setting, execute the various operations after pushing the VCR or the LD/DVD button. Push the button of the unit to be set (VCR or LD / DVD) . While pushing the VCR / LD / DVD Power button, push the manufacturer code setting (enter the two digit code), and push the VCR / LD / DVD Stop button. If there is no operation, set a different code. [. . . ]