User manual PANASONIC TX-58AX802B

[. . . ] Note : Follow the on screen instructions for operating the related features. To operate your TV in extreme ambient conditions may cause damage of the device. IMPORTANT - Please read these instructions fully before installing or operating WARNING: Never let people (including children) with reduced physical, sensory or mental capabilities or lack of experience and / or knowledge use electrical devices unsupervised. € For ventilation purposes, leave a free space of at least 10 cm all around the set. [. . . ] If you select Cable option and press OK button on the remote control a confirmation screen will be displayed. You can select frequency ranges from next screen. Enter the frequency range manually by using the numeric buttons. when finished , press OK button to start automatic search. Note: Searching duration will change depending on the selected search step. Satellite Installation If you select Satellite option from the search type selection screen, you can set a satellite and watch satellite channels. when you select Satellite installation , Antenna Type menu will be displayed. You can select Antenna type as Direct, Unicable or DiSEqC switch. Direct: If you have a single receiver and a direct satellite dish, select this antenna type. After selecting Direct, another menu screen will be displayed. select an available satellite and press OK to scan for services. The backlight cannot be activated in VGA, Media Browser mode or while the picture mode is set to Game. If the broadcast signal is weak and the picture is noisy, use the Noise Reduction setting to reduce the amount of noise. Advanced Settings You can change the Dynamic Contrast ratio to desired value. Sets the desired picture size from picture zoom menu. Note: Auto (Only available in Scart mode with SCART PIN8 high voltage/low voltage switching) HDMI True Black Film Mode Skin Tone Colour Shift RGB Gain Reset Autoposition (in PC mode) H Position (in PC mode) V Position (in PC mode) Dot Clock (in PC mode) Phase (in PC mode) While watching from HDMI source, this feature will be visible in the Picture Settings menu. You can use this feature to enhance blackness in the picture. Films are recorded at a different number of frames per second to normal television programmes. Turn this feature on when you are watching films to see the fast motion scenes clearly. Skin tone can be changed between -5 and 5. You can configure the colour temperature values using the RGB Gain feature. Resets the picture settings to factory default settings. [. . . ] To cancel mute, press the “ ” button, or increase the volume level. Remote control - does not operate • The batteries may be exhausted. Input sources - can not be selected • If you cannot select an input source, it is possible that no device is connected. If not • Check the AV cables and connections if you have tried to connect a device. [. . . ]