User manual PANASONIC TX-D9S54

[. . . ] 29)) Sharp pictures with HDMI terminal Control DVD recorder / VCR via TV with Q-Link connection (p. 38) Create home theatre and Panasonic equipment link-ups with "VIERA Link" without complicated settings!40) Support Audio Description signal (p. 22) Audio description (AD) is an ancillary component associated with a broadcasting which delivers a verbal description of the visual scene as an aid to understanding and enjoyment particularly, for visually-impaired viewers. Trade Mark of the DVB Digital Video Broadcasting Project (1991 to 1996) TX-26LMD70A Declaration of Conformity No 4927, 19 July 2007 TX-D9S54 Declaration of Conformity No 4926, 19 July 2007 2 Contents HD ready HD ready means the ability to display high-definition pictures from HDMI and Component video inputs. [. . . ] Use this function to skip unwanted services. Select a service and add / delete DVB Service List 70 72 105 719 720 1 7 CBBC Channel Cartoon Nwk BBCi BBC Radio Wales BBC Radio Cymru BBC ONE Wales BBC THREE add / delete select (DVB mode) :add :delete (skip) You can lock specific channels and control who watches them. (When a channel is selected, a message appears; by entering the PIN number, you can watch the channel. ) Advanced Enter the PIN number (4 digits) Child Lock-PIN Entry 1 of 2 1 4 2 5 8 0 VCR 3 6 9 Please enter new PIN PIN **** 7 · · access select Enter the PIN number twice at first setting. Make a note of the PIN number in case you forget it. Select "Child Lock Service List" Child Lock 1 of 2 Control channel audience Child Lock Change PIN Child Lock Service List Access Select the channel to be locked Child Lock Service List Wed 12/05/04 10:46 set select 1 7 14 70 72 105 719 720 Service Name BBC One Wales BBC THREE E4 CBBC Channel Cartoon Nwk BBCi BBC Radio Wales BBC Radio Cymru Type Digital Lock · · · To cancel Select the locked channel To lock all channels yellow blue Appears when the channel is locked To cancel all channel locks To change the PIN number Select "Change PIN" in and enter a new PIN number twice. · Note Setting "Shipping Condition" (p. 32) erases the PIN number and all settings. 29 Tuning Channels You can re-tune all TV channels when moving house or search for new services which may have recently started broadcasting. 1 INPUT GUIDE EXIT Select DVB or Analogue · · MENU "DVB Manual Tuning", "Add New DVB Services", "New Service Message" and "DVB Signal Condition" are available in DVB mode only. "Analogue Programme Edit" and "Analogue Manual Tuning" are available in Analogue mode only. 2 3 4 5 Display the menu OK MENU RETURN Select "Setup" Main Menu VIERA Link Picture Sound Setup ASPECT OPTION DIRECT TV REC access 1 4 7 2 5 8 0 VCR 3 6 9 select Select "Tuning Menu" Setup Menu 1/2 access TEXT STTL INDEX HOLD REC PROGRAMME VCR DVD DVB Timer Programming DVB Profile Edit DVB Service List Q-Link Settings Child Lock Tuning Menu Off Timer Power on Preference Teletext select Access Off Off TV FASTEXT Select a function and set Tuning Menu access Access Access Access Access Access On Off Access To return to TV EXIT Auto Setup Analogue Programme Edit DVB Manual Tuning Analogue Manual Tuning Add New DVB Services New Service Message DVB Signal Condition select Automatically set the DVB and Analogue channels received in the area. 29) has been set, it must be entered. Start Auto Setup Auto Setup Settings are made automatically Auto Setup - Digital and Analogue Digital Scan Analogue Scan Channel Service Name 62 CBBC Channel 62 BBC Radio Wales 62 BBC Radio Cymru 62 E4 62 Cartoon Nwk 29 33 BBC1 This will take about 3 mins. 21 21 Type DVB DVB DVB DVB DVB Analogue Analogue Quality 10 10 10 10 10 - All tuning data will be erased Start Auto Setup EXIT RETURN 68 68 · · Set DVB and Analogue channels automatically Auto Setup All previous settings are erased. The analogue settings are downloaded to a Q-Link compatible equipment connected to the TV. · · When the operation is completed, the digital broadcast of programme number "1" will appear. If no DVB services are found, the analogue broadcast will appear. If tuning has not done completely "DVB Manual Tuning", "Analogue Manual Tuning" F TV AV For Auto Setup, using the buttons on the top of the TV Press repeatedly until "Auto Setup" appears F Access "Auto Setup" TV Start "Auto Setup" TV To return to TV F 30 Edit the analogue programme position settings Select the channel to edit Analogue Programme Edit Prog. 1 · To change channel number "Analogue Manual Tuning" Chan. CH33 CH21 CH21 CH60 CH21 Name 123 XYZ FTP Edit Analogue channels Analogue Programme Edit Delete Add Move Change name 2 3 4 5 select Channel Name 3 FTP Corontation Street 23:35 Profile 1 Change category For info press 456 Cursor Edit To delete To add To move red red After confirming, press green To change the name of the broadcaster displayed when selecting channels Analogue Programme Edit Prog. 1 2 3 4 5 Chan. CH33 CH21 CH21 CH60 CH21 Name 123 XYZ FTP Select the "Name" field red After confirming, press green yellow yellow 456 Enter the "User Input" mode Select the character Set Select new position (Maximum: five characters) · Tuning Channels Set DVB channel manually DVB Manual Tuning Normally use "Auto Setup" or "Add New DVB Services" for the DVB channel setting. If tuning has not done completely, use this function. DVB Manual Tuning select channel [CH21] 0 0 Service Name Net ID. If "Skip" is selected, you cannot select the mode. · User Input You can name each input terminals freely. Select "User Input" Set characters User Input 1 of 2 AV1 Name select LMNOPQRS 456789!: lmnopqrs *_ T # t select access ABCDE UVWXY abcde uvwxy FGHI Z 01 fghi z()+ J 2 j - K 3 k . store (maximum: ten characters) 34 Displaying PC Screen on TV The screen of the PC connected to the TV can be displayed on the TV. You can also listen to PC sound with the audio cable connected. 42) INPUT GUIDE EXIT 1 RETURN Select the external input OK MENU ASPECT OPTION DIRECT TV REC 2 Select "PC" Input Selection access 1 4 7 2 5 8 0 VCR 3 6 9 AV1 AV2/AV2S AV3/AV3S COMPONENT PC HDMI1 HDMI2 TV select · · · Displaying PC Screen on TV Input Labels Corresponding signals (p. 46) If "H-freq. " or "V-freq. " is shown in red, the signals may not be supported. To return to TV · · PC menu setting (changed as desired) To make settings "How to Use Menu Functions" to (p. 21) Menu Item R-Gain Adjustments / Configurations (options) Adjusts the white balance for red areas Adjusts the white balance for green areas Adjusts the white balance for blue areas (2. 0 / 2. 2 / 2. 5) · Picture Setup Advanced G-Gain PC Settings B-Gain Gamma Input Resolution Clock · · Switches to a wide view VGA (640 × 480 pixels), WVGA (852 × 480 pixels), XGA (1, 024 × 768 pixels), WXGA (1, 366 × 768 pixels) Options change depending on signals Advanced Set to the minimum level if noise occurs Adjusts horizontal position H-pos PC Setup V-pos Adjusts vertical position Clock Phase · · Eliminates flicker and distortion Adjust after Clock adjustment · Set to the minimum level if noise occurs Sync Chooses another synchronous signal if the image is distorted (H & V / On G) H & V : by the horizontal and vertical signals from your PC On G : by the green signal from your PC (if available) Other items p. 23 35 Recording Controls (DVB mode) Timer Programming from Menu The Timer programming menu allows you to choose programmes that you wish to record. At the correct time, the DVB system will switch on and tune to the correct station (even if the TV is in Standby mode). If the recording equipment is compatible with Q-Link or similar technologies (p. 38) and connected to the TV's AV2 terminal using a SCART cable (p. 42), you do not need to programme the device ­ the DVB system will control the recording process. TV Guide may also be used to set timer programmes. [. . . ] 37). Timer Event Due to Start 1: BBC1 has been Programmed for recording at 20:00 This message will appear 2 minutes before timer programming event due to start. Timer incorrect ! Set Starting and Ending times in Timer Programming correctly (p. The timer programme events are overlapped. Cannot record other channel at the same time. Check the Starting and Ending times in Timer Programming (p. [. . . ]