User manual PANASONIC TXL26X20B

[. . . ] Model No. TX-L26X20B Operating Instructions LCD Television Thank you for purchasing this Panasonic product. Please read these instructions carefully before operating this product and retain them for future reference. The images shown in this manual are for illustrative purposes only. suffix denotes UK model. English U. K. [. . . ] When recording programmes, be sure to make the proper settings on the recorder connected to the TV. If a compatible recorder with Q-Link or similar technologies is connected to the TV (p. 58) and the "Link Settings" (p. 30) are correct, no setting of the recorder is required. If the recorder is not compatible with Q-Link or similar technologies, set "Q-Link" in the Setup Menu (p. 30) to the connected terminal (AV1 or AV2), and set the timer of the recorder in addition to the Timer Programming on the TV. For preparations of a recorder, read the manual of the recorder. Recordings are always in standard definition composite video via SCART, even if the original programme is in high definition. INPUT TV MENU EXIT 1 2 3 Select the tuner you want to use (DVB or Analogue) TV Display the menu MENU Select "Setup" Main Menu Picture Sound Setup access abc ghi pqrs jkl tuv def mno wxyz select 4 Select "Timer Programming" Setup Menu Timer Programming Off Timer Link Settings Child Lock DVB Tuning Menu Display Settings System Menu Other Settings access Access Off To return to TV EXIT select To unlock the tuner (stop recording) EXIT 5 Set Note Check that the LED is orange. If not, timer programmes are not active or not stored. Timer Programming reminder messages will remain displayed until one of the following occurs: · You press the OK button to view the programme or the EXIT button to cancel the reminder. · The timer programming event that the reminder is set for ends. "!" identifies that any timer programming events have overlapped. "Ext Rec. " is given priority over "Reminder". When two or more "Ext Rec. " overlap, the first timer programming event starts and finishes as programmed. The next timer programming event will then start. before the starting time, a reminder message appears if you are watching TV. EXIT · To remove the message and start the programme · To cancel the Timer Programming 42 Ext Rec. of Timer Programming will automatically change to the programmed channel 10 seconds before the start time. To stop recording of the timer programming event, it may be necessary to stop the recorder manually. of Timer Programming will be performed even if the TV is in Pause Live TV recording (p. In this case, the Pause Live TV recording will be cancelled. Set timer programming event details Timer Programming Start making the settings Select the function (Reminder or Ext Rec. ) Ext Rec. : to record the programme to the recorder When the start time comes, the channel will be switched automatically and the video and audio signals will be output. before the starting time, a reminder message appears if you are watching TV. [. . . ] NTSC (AV input only) Playback from NTSC Video recorders (VCR). Aerial input UHF Temperature : 0 °C - 35 °C Operating Conditions Humidity : 20 % - 80 % RH (non-condensing) AV1 (SCART terminal) 21 Pin terminal (Audio/Video in, Audio/Video out, RGB in, Q-Link) AV2 (SCART terminal) 21 Pin terminal (Audio/Video in, Audio/Video out, RGB in, S-Video in, Q-Link) Sound Connection Terminals AV3 VIDEO RCA PIN Type × 1 Y PB, PR 1. 0 V[p-p] (75 :) 0. 5 V[rms] 1. 0 V[p-p] (including synchronization) ±0. 35 V[p-p] 0. 5 V[rms] AUDIO L - R RCA PIN Type × 2 VIDEO Power Source Rated Power Consumption Display panel COMPONENT AUDIO L - R RCA PIN Type × 2 TYPE A Connectors : HDMI (Version 1. 4 with Audio Return Channel) HDMI 1 / 2 / 3 HDMI2 This TV supports "HDAVI Control 5" function. Others PC Card slot HIGH-DENSITY D-SUB 15PIN R, G, B/0. 7 V[p-p] (75 :) HD, VD/TTL Level 2. 0 - 5. 0 V[p-p] (high impedance) Maintenance SD Card slot × 1 Common Interface slot × 1 AUDIO L - R RCA PIN Type × 2 0. 5 V[rms] (high impedance) Output DIGITAL AUDIO OUT PCM / Dolby Digital, Fiber optic 664 mm × 474 mm × 217 mm (With Pedestal) Dimensions ( W × H × D ) 664 mm × 434 mm × 109 mm (TV only) 9. 5 kg Net (With Pedestal) Mass 8. 0 kg Net (TV only) Specifications Licence Index Design and Specifications are subject to change without notice. Mass and Dimensions shown are approximate. [. . . ]