User manual PANASONIC TXL32C20B

[. . . ] Model No. TX-L32C20B Operating Instructions LCD Television Thank you for purchasing this Panasonic product. Please read these instructions carefully before operating this product and retain them for future reference. The images shown in this manual are for illustrative purposes only. suffix denotes UK model. English U. K. [. . . ] 19). Timer Programming can store up to 15 events. For recording using Timer Programming, the TV must be either On or in standby. For reminders to be displayed, the TV must be On. No other channel can be selected while Ext Rec. It may not be possible to record an encrypted programme (which is copy-protected). When recording programmes, be sure to make the proper settings on the recorder connected to the TV. If a compatible recorder with Q-Link or similar technologies is connected to the TV (p. 54) and the "Link Settings" (p. 29) are correct, no setting of the recorder is required. If the recorder is not compatible with Q-Link or similar technologies, set "Q-Link" in the Setup Menu (p. 29) to the connected terminal (AV1 or AV2), and set the timer of the recorder in addition to the Timer Programming on the TV. For preparations of a recorder, read the manual of the recorder. Recordings are always in standard definition composite video via SCART, even if the original programme is in high definition. INPUT TV MENU EXIT 1 2 3 Select the tuner you want to use (DVB or Analogue) TV Display the menu MENU Select "Setup" Main Menu Picture Sound Setup access abc ghi pqrs jkl tuv def mno wxyz select 4 Select "Timer Programming" Setup Menu Timer Programming Off Timer Link Settings Child Lock DVB Tuning Menu Display Settings System Menu Other Settings access Access Off To return to TV EXIT select To unlock the tuner (stop recording) EXIT 5 Set Note Check that the LED is orange. If not, timer programmes are not active or not stored. Timer Programming reminder messages will remain displayed until one of the following occurs: · You press the OK button to view the programme or the EXIT button to cancel the reminder. · The timer programming event that the reminder is set for ends. "!" identifies that any timer programming events have overlapped. "Ext Rec. " is given priority over "Reminder". When two or more "Ext Rec. " overlap, the first timer programming event starts and finishes as programmed. The next timer programming event will then start. before the starting time, a reminder message appears if you are watching TV. EXIT · To remove the message and start the programme · To cancel the Timer Programming 40 Ext Rec. of Timer Programming will automatically change to the programmed channel 10 seconds before the start time. [. . . ] NTSC (AV input only) Playback from NTSC Video recorders (VCR). UHF Temperature : 0 °C - 35 °C Humidity : 20 % - 80 % RH (non-condensing) 21 Pin terminal (Audio/Video in, Audio/Video out, RGB in, Q-Link) 21 Pin terminal (Audio/Video in, Audio/Video out, RGB in, S-Video in, Q-Link) RCA PIN Type × 1 1. 0 V[p-p] (75 :) 0. 5 V[rms] 1. 0 V[p-p] (including synchronization) ±0. 35 V[p-p] Receiving Systems / Band name Aerial input Operating Conditions AV1 (SCART terminal) AV2 (SCART terminal) AV3 VIDEO AUDIO L - R RCA PIN Type × 2 COMPONENT VIDEO HDMI 1 / 2 Others Card slot Y PB, PR TYPE A Connectors HDMI2 : HDMI (Version 1. 4 with Audio Return Channel) This TV supports "HDAVI Control 5" function. SD Card slot × 1 Common Interface slot × 1 Maintenance AUDIO L - R RCA PIN Type × 2 Output DIGITAL AUDIO OUT PCM / Dolby Digital, Fiber optic 0. 5 V[rms] (high impedance) Dimensions ( W × H × D ) 798 mm × 551 mm × 217 mm (With Pedestal) 798 mm × 511 mm × 93 mm (TV only) 11. 0 kg Net (With Pedestal) 9. 5 kg Net (TV only) Specifications Licence Index Design and Specifications are subject to change without notice. Mass and Dimensions shown are approximate. [. . . ]