User manual PANASONIC TX-L32C5B

[. . . ] TX-L42U5B TX-L32C5B Model No. Operating Instructions LCD Television Thank you for purchasing this Panasonic product. Please read these instructions carefully before operating this product and retain them for future reference. The images shown in this manual are for illustrative purposes only. Please refer to Pan European Guarantee Card if you need to contact your local Panasonic dealer for assistance. [. . . ] −− Press FAVORITE button again to open the favourite channel list, selects the current channel, then press OK to remove the channel from the favourite channel list. 4 AUDIO Selects multi audio in DVB mode or MPX selection in analogue mode. 5 OFF TIMER Sets the time settings of off timer. 6 VOL +/Press to adjust the volume. • • • • • • • • • 12 Turning On/Off LCD TV 1. Complete the peripheral connections before turning on LCD TV. 2. Connect LCD TV’s AC Power Cord into an AC outlet. 3. Press POWER button on Side Control of LCD TV or use Remote Control to turn it ON. The POWER indicator will light up (green). 4. Press POWER button again to enter stand-by status, the POWER indicator will become red. Note: If there is no reaction when you press (POWER) on the remote control, press (POWER) button on Side Control again to active the TV. ASPECT Select screen size among “Auto”, “4:3“, “Zoom 1”, “Zoom 2”, “16:9” by pressing ASPECT button on Remote Control. [Auto] The optimum size and aspect can be chosen automatically, and you can enjoy finer images. [4:3] Displays the image at the standard 4:3 without distortion. [Zoom 1] Scales the classic 4:3 format to 14:9. [Zoom 2] Scales the classic 4:3 format to 16:9. [16:9] Directly displays the image at 16:9 without distortion (anamorphic). Note: [Auto] mode determines the best aspect ratio to fill the screen. It does this using a three step process (WSS, Control signal through SCART / HDMI terminal) to determine. Selecting Input Source Select mode AV 1, AV 2, HDMI 1, HDMI 2, HDMI 3*1, PC, USB, or TV by pressing INPUT(AV) button of Remote Control or INPUT/OK button of Side Control. Input Selection AV 1 AV 2 HDMI 1 HDMI 2 HDMI 3 PC USB TV *1: HDMI 3 is only for TX-L42U5B model. 13 Initial Setup 1 Initial Setup <On-Screen> Initial Setup <Remote / Operation> Welcome to use the Wizard for Initial Setup !!Please press [OK] to start the wizard. 2 Mode Select (TV location setting) <On-Screen> Initial Setup Please select your mode Home Shop <Remote / Operation> Mode select EXIT Back Next Select Back Select Next Exit Exit Note: If you selected Shop, a message appears “Are you sure ?”. Select Yes to continue, or select No to change your selection. Select Home viewing environment to use in your home environment. Shop viewing environment is the demonstration mode to explain main features of this TV. To change viewing environment later on, you will need to initialise all settings by accessing Shipping Condition. • • 3 Country Setting <On-Screen> Initial Setup Please select your country: United Kingdom Ireland <Remote / Operation> Country EXIT Back Next Select Back Select Next Exit Exit 14 Initial Setup 4 Channel Scan <On-Screen> Initial Setup First, please connect aerial. If you skip this step, the channel scan could be performed in Menu. <Remote / Operation> Channel Scan EXIT Back Next Select Scan Skip Scan Back Select Next Exit Exit 5 Search for channels <On-Screen> Initial Setup Channel Scan The channel scan may take a while to complete. [. . . ] *2: When the TV is turned off with the remote control and no function is active. 23 Input Signal Compatibility Chart COMPONENT (Y, PB, PR), HDMI Signal name 525 (480) / 60i, 60p 625 (576) / 50i, 50p 750 (720) / 60p, 50p 1, 125 (1, 080) / 60i, 50i 1, 125 (1, 080) / 60p, 50p, 24p COMPONENT HDMI Mark : Applicable input signal PC (from D-sub terminal/ HDMI terminal) Signal name 640 × 400 @70 Hz 640 × 480 @60 Hz 640 × 480 @75 Hz 800 × 600 @60 Hz 800 × 600 @75 Hz 800 × 600 @85 Hz 1, 024 × 768 @60 Hz 1, 024 × 768 @70 Hz 1, 024 × 768 @75 Hz 1, 024 × 768 @85 Hz 1, 280 × 768 @60 Hz 1, 280 × 1, 024 @60 Hz 1, 366 × 768 @60 Hz Macintosh13” (640 × 480) Macintosh16” (832 × 624) Macintosh21” (1, 152 × 870) Horizontal frequency (kHz) 31. 47 31. 47 37. 50 37. 88 46. 88 53. 67 48. 36 56. 48 60. 02 68. 68 47. 78 63. 98 48. 39 35. 00 49. 73 68. 68 Vertical frequency (Hz) 70. 08 59. 94 75. 00 60. 32 75. 00 85. 08 60. 00 70. 07 75. 03 85. 00 59. 87 60. 02 60. 04 66. 67 74. 55 75. 06 Applicable input signal for PC is basically compatible to VESA standard timing Applicable input signal for PC is basically compatible to HDMI standard timing Note: Signals other than above may not be displayed properly. The above signals are reformatted for optimal viewing on your display. PC signal is magnified or compressed for display, so that it may not be possible to show fine detail with sufficient clarity. Only HDMI 1 supports PC/DVI (co-use R/L of YPbPr RCA jack for DVI mode audio input). • • • • 24 Multi-media Supported Specification Photo Format JPEG File extension . jpeg Image resolution (pixel) Details / Restrictions Baseline jpeg: 4 x 4 to 17, 000 x10, 000 DCF*1 and EXIF∗2 standards Progressive jpeg: Sub-sampling : 4:4:4, 4:2:2, 4:2:0 4 x 4 to 4, 000 x 4, 000 ∗1 :  Design rule for Camera File system - unified standard established by Japan Electronics and Information Technology Industries Association (JEITA) ∗2 :  Exchangeable Image File - image file format used by digital cameras Music Codec MP3 AAC WMA File extension . mp3 . m4a . wma Restrictions – – WMA lossless/WMA Pro are not supported. Movie Container AVCHD AVI ASF MKV MP4 TS PS FLV 3GPP File extension . mts . avi . asf . wmv . mkv . mp4 . m4v . ts . tp . mpg . mpeg . flv . f4v . 3gp Video codec H. 264 BP/MP/HP H. 264 BP/MP/HP MPEG 4 Windows Media Video v9/VC-1 H. 264 BP/MP/HP H. 264 BP/MP/HP H. 264 BP/MP/HP MPEG 2 MPEG 1/MPEG 2 H. 264 BP/MP/HP H. 264 BP/MP/HP MPEG 4 Audio codec Dolby Digital MP3, MPEG1 Layer1/2, Dolby Digital, AAC, HE-AAC Windows Media Audio v8, MP3 MP3, MPEG1 Layer1/2, Dolby Digital, AAC, HE-AAC MP3, AAC, HE-ACC Dolby Digital, Dolby Digital Plus, MP3, AAC, HE-AAC Dolby Digital, MPEG1 Layer1/2, AAC, DVD LPCM MP3, AAC, HE-AAC AAC, HE-AAC Note: Some files may not be played back even if they fulfill these conditions. [. . . ]