User manual PANASONIC TX-L32D26

[. . . ] Model No. TX-L32D26BA TX-L42D26BA Operating Instructions LCD Television Thank you for purchasing this Panasonic product. Please read these instructions carefully before operating this product and retain them for future reference. The images shown in this manual are for illustrative purposes only. "B" or "B" model no. [. . . ] select The automatic updating is performed at night under the following conditions: · Standby (TV turned Off with the remote control) · Recording of Timer Programming, Direct TV Recording or One Touch Recording is not in progress. If System Update is performed, the software will be updated (it may change TV functions). If you do not wish to do so, set "Auto Update Search in Standby" to "Off". The notification banner will keep appearing during the period of new software availability, usually 2 to 3 days. Select "System Update Search Now" System Update Auto Update Search in Standby System Update Search Now To update immediately Off Access access select Searches for an update (for several mins. ) and displays a corresponding message if any Download 58 Download may take up to 60 mins. During software download and update, DO NOT perform any operations on the TV or switch Off the TV. Note Displaying PC Screen on TV The screen of the PC connected to the TV can be displayed on the TV. You can also listen to PC sound with the audio cable connected. To connect PC p. 92 INPUT TV AV 1 2 Select the external input AV Select "PC" Input Selection AV1 AV2/S AV3 COMPONENT PC HDMI1 HDMI2 HDMI3 HDMI4 TV Media Server access Displaying PC Screen on TV Updating the TV Software select Corresponding signals p. 98 If "H-freq. " or "V-freq. " is shown in red, the signals may not be supported. To return to TV TV PC menu setting To make settings Advanced Settings PC Setup Menu Item R-Gain G-Gain B-Gain R-Cutoff G-Cutoff B-Cutoff "How to Use Menu Functions" to (p. 31) Adjustments / Configurations (options) Adjusts the white balance of bright red area Adjusts the white balance of bright green area Adjusts the white balance of bright blue area Adjusts the white balance of dark red area Adjusts the white balance of dark green area Adjusts the white balance of dark blue area Switches the gamma curve (1. 8 / 2. 0 / 2. 2 / 2. 4 / 2. 6) Gamma Please note the numerical values are reference for the adjustment. Reset to Defaults Press the OK button to reset to the default Advanced Settings Switches to a wide view VGA (640 × 480 pixels), WVGA (852 × 480 pixels), Input Resolution XGA (1, 024 × 768 pixels), WXGA (1, 280 × 768 pixels, 1, 366 × 768 pixels) Options change depending on signals Set to the minimum level if noise occurs Clock Adjusts horizontal position Other items Note For HDMI-compatible PC, possible to connect to HDMI terminals (HDMI1 / HDMI2 / HDMI3 / HDMI4) by using HDMI cable (p. 96). Picture Setup Advanced H-pos Adjusts vertical position V-pos Eliminates flicker and distortion Adjust after Clock adjustment Set to the minimum level if noise occurs Chooses another synchronous signal if the image is distorted (H & V / On Green) H & V : by the horizontal and vertical signals from your PC Sync On Green : by the green signal from your PC (if available) Reset to Defaults Press the OK button to reset to the default PC Setup settings Clock Phase p. 32 - 36 59 Advanced Picture Settings You can adjust and setup the detailed picture settings for each Viewing Mode. To use this function completely, set "Advance(isfccc)" to "On" in the Setup Menu. 35 For PC input mode, some functions are available without setting "Advance(isfccc)". Select the input mode to adjust and setup 1 2 3 4 p. 28 AV INPUT TV AV MENU EXIT TV Display the menu MENU Select "Picture" Main Menu Picture Sound Setup access select Select "Viewing Mode" and set the mode Picture Menu Viewing Mode Contrast Brightness Colour Sharpness Colour Balance Vivid Colour C. A. T. S. P-NR 1/2 Dynamic abc ghi pqrs jkl tuv def mno wxyz set select Warm Off Off Off 5 To return to TV EXIT Select one of the following functions Picture Menu Picture Display Advanced Settings Lock Settings Copy Adjustment Reset to Defaults 2/2 On Access Access Access Reset access select "Copy Adjustment" is available when "Viewing Mode" in the Picture Menu is set to "Professional1" or "Professional2". 6 Set Lock the picture setting Lock Settings Advanced Settings can be locked for each Viewing Mode. Additionally, Contrast, Brightness, Colour, Sharpness, Tint and Reset to Defaults in the Picture Menu can be locked for "Professional1" and "Professional2". "Professional1" and "Professional2" can be locked for each input. Enter the PIN number (4 digits) Lock Settings-PIN Entry Please enter new PIN PIN abc def mno wxyz **** ghi pqrs jkl tuv Enter the PIN number twice at first setting. Make a note of the PIN number in case you forget it. Select "Adjustment Lock" and set to "On" Lock Settings Change PIN Adjustment Lock On To change the PIN number Select "Change PIN" Lock Settings Change PIN Adjustment Lock Access On set select Enter a new PIN number twice access ghi abc jkl tuv def mno wxyz 60 select pqrs Adjust the detailed picture settings Advanced Settings To make settings Advanced Settings R-Gain G-Gain B-Gain R-Cutoff G-Cutoff B-Cutoff Gamma Reset to Defaults "How to Use Menu Functions" to (p. 31) 2. 2 Reset Menu Advanced Settings Advanced Settings Item R-Gain G-Gain B-Gain R-Cutoff G-Cutoff B-Cutoff Gamma Reset to Defaults Adjustments / Configurations (alternatives) Adjusts the white balance of bright red area Adjusts the white balance of bright green area Adjusts the white balance of bright blue area Adjusts the white balance of dark red area Adjusts the white balance of dark green area Adjusts the white balance of dark blue area Switches the gamma curve (1. 8 / 2. 0 / 2. 2 / 2. 4 / 2. 6) Please note the numerical values are reference for the adjustment. Press the OK button to reset to the default Advanced Settings For the mode of "Professional1" or "Professional2" in "Viewing Mode" "Professional1" and "Professional2" can be adjusted and set for each input. [. . . ] 500 mA (overload protection) 22 kHz Tone - Frequency: 22 kHz ± 2 kHz Amplitude: 0. 6 V ± 0. 2 V Symbol Rate - Max. 30 MS/s FEC Mode - 1/2, 3/5, 2/3, 3/4, 4/5, 5/6, 8/9, 9/10 Demodulation - QPSK, 8PSK Not available for DiSEqC control. DVB-T / T2 : Digital terrestrial services via UHF aerial input. PAL I : UHF E21-68 PAL 525/60 : Playback of NTSC tape from some PAL Video recorders (VCR) or NTSC disc playback from DVD player and recorder. [. . . ]