User manual PANASONIC TXL37V20E

[. . . ] Model No. TX-L37V20E TX-L42V20E Operating Instructions LCD Television Thank you for purchasing this Panasonic product. Please read these instructions carefully before operating this product and retain them for future reference. The images shown in this manual are for illustrative purposes only. Please refer to Pan European Guarantee Card if you need to contact your local Panasonic dealer for assistance. English TQB0E0934U Experience an amazing level of multimedia excitement Enjoy rich multimedia VCR Amplifier with Speaker system DVD Recorder DVD Player USB HDD This TV is designed to meet the standards (current as of August, 2009) of DVB-T (MPEG2 and MPEG4-AVC(H. 264)) digital terrestrial services, DVB-C (MPEG2 and MPEG4-AVC(H. 264)) digital cable services and DVB-S (MPEG2 and MPEG4-AVC(H. 264)) digital satellite services. [. . . ] If System Update is performed, the software will be updated (it may change TV functions). If you do not wish to do so, set "Auto Update Search in Standby" to "Off". Download Every time you set, the TV automatically performs a To update immediately System Update Auto Update Search in Standby System Update Search Now Off Access Select "System Update Search Now" access select Searches for an update (for several mins. ) and displays a corresponding message if any Download may take for about 60 mins. During software download and update, DO NOT switch Off the TV. The message might be the notification beforehand. In this case, the schedule information (the date that the Note new version can be used) will appear. The update will not start when the TV is set to Off. 49 Multi Window Enjoy viewing the digital TV programme and external input (AV, COMPONENT or HDMI) at once. MENU 1 2 3 Display the menu MENU Select "Picture" Main Menu Picture Sound Setup access select Select "Picture in Picture" Picture Menu Picture in Picture Panel Reset to Defaults 2/2 Access On Reset access select 1 DVB-T Remote control operations apply to the main screen. AV1 EXIT PandP Swap Main screen Sub screen How to operate in multi window TV Display the colour bar if it is not displayed Picture-in-Picture mode (PinP) 1 DVB-T Picture-and-Picture mode (PandP) 1 DVB-T AV1 yellow AV1 green EXIT PinP Swap EXIT PandP Swap blue AV1 1 DVB-T EXIT PandP Swap Colour bar red To exit multi window To change the input mode or channel of sub screen Swap sub screen for main screen blue Change the input mode or channel by the remote control (p. 24) Swap again blue Each input mode can only be displayed either on main screen or sub screen. The sound comes from only the main screen in multi window. You cannot change the aspect ratio in multi window. This function cannot be used with PC, Media Player or Network services. Some signals are reformatted for suitable viewing on your display. Note 50 Displaying PC Screen on TV The screen of the PC connected to the TV can be displayed on the TV. You can also listen to PC sound with the audio cable connected. To connect PC p. 84 INPUT TV AV 1 2 Select the external input AV Select "PC" Input Selection AV1 AV2/S AV3 COMPONENT PC HDMI1 HDMI2 HDMI3 HDMI4 TV Media Server access select Displaying PC Screen on TV Multi Window Corresponding signals p. 90 If "H-freq. " or "V-freq. " is shown in red, the signals may not be supported. To return to TV TV PC menu setting To make settings Advanced Settings PC Setup Menu "How to Use Menu Functions" to (p. 27) Item R-Gain G-Gain B-Gain R-Cutoff G-Cutoff B-Cutoff Gamma Reset to Defaults Input Resolution Clock H-pos Adjustments / Configurations (options) Adjusts the white balance of bright red area Adjusts the white balance of bright green area Adjusts the white balance of bright blue area Adjusts the white balance of dark red area Adjusts the white balance of dark green area Adjusts the white balance of dark blue area Switches the gamma curve (1. 8 / 2. 0 / 2. 2 / 2. 4 / 2. 6) Press the OK button to reset to the default Advanced Settings Switches to a wide view VGA (640 × 480 pixels), WVGA (852 × 480 pixels), XGA (1, 024 × 768 pixels), WXGA (1, 280 × 768 pixels, 1, 366 × 768 pixels) Options change depending on signals Set to the minimum level if noise occurs Adjusts horizontal position Other items Note For HDMI-compatible PC, possible to connect to HDMI terminals (HDMI1 / HDMI2 / HDMI3 / HDMI4) by using HDMI cable (p. 89). Picture Setup Advanced Adjusts vertical position V-pos Eliminates flicker and distortion Adjust after Clock adjustment Set to the minimum level if noise occurs Chooses another synchronous signal if the image is distorted (H & V / On Green) H & V : by the horizontal and vertical signals from your PC Sync On Green : by the green signal from your PC (if available) Reset to Defaults Press the OK button to reset to the default PC Setup settings Clock Phase p. 28 - 33 51 Advanced Picture Settings You can adjust and setup the detailed picture settings for each input and Viewing Mode. To use this function completely, set "Advance(isfccc)" to "On" in the Setup Menu. 33 For PC input mode, some functions are available without setting "Advance(isfccc)". Select the input mode to adjust and setup 1 2 3 p. 24 AV INPUT TV AV MENU EXIT TV Display the menu MENU Select "Picture" Main Menu Picture Sound Setup access select abc ghi pqrs jkl tuv def mno wxyz 4 Select "Viewing Mode" and set the mode Picture Menu Viewing Mode Contrast Brightness Colour Sharpness Colour Balance Vivid Colour Eco Mode P-NR 1/2 Dynamic 60 0 30 5 Warm Off Off Off set select 5 To return to TV EXIT Select one of the following functions Picture Menu Advanced Settings Lock Settings Copy Adjustment Reset to Defaults 2/2 Access Access Access Reset access select "Copy Adjustment" is available when "Viewing Mode" in the Picture Menu is set to "Professional1" or "Professional2". 6 Set Lock the picture setting Lock Settings Advanced Settings can be locked for each Viewing Mode and input. Additionally, Contrast, Brightness, Colour, Sharpness, Tint and Reset to Defaults in the Picture Menu can be locked for "Professional1" and "Professional2". Enter the PIN number (4 digits) Lock Settings-PIN Entry Please enter new PIN PIN abc def mno wxyz **** ghi pqrs jkl tuv Enter the PIN number twice at first setting. [. . . ] (English only) http://panasonic. jp/support/global/cs/tv/ Female F-type 75 VHF / UHF Temperature : 0 °C - 35 °C Humidity : 20 % - 80 % RH (non-condensing) 106 cm (diagonal) 930 mm (W) × 523 mm (H) 152 W TX-L42V20E With Pedestal 919 mm × 633 mm × 287 mm Dimensions (W × H × D) TV only Receiving Systems / Band name Satellite dish input Aerial input Operating Conditions 94 Wireless LAN Adaptor Dimensions (W × H × D) Mass Antenna Interface Standard Compliance Transmission system Frequency Range 44 mm × 27 mm × 72 mm 29 Net Tx 1, Rx 2 USB2. 0 IEEE802. 11n / IEEE802. 11a / IEEE802. 11g / IEEE802. 11b MISO-OFDM system, OFDM system, DSSS system IEEE802. 11n / IEEE802. 11a: 5. 15 GHz - 5. 35 GHz 5. 47 GHz - 5. 725 GHz IEEE802. 11g / IEEE802. 11b / IEEE802. 11n: 2. 4 GHz - 2. 4835 GHz IEEE802. 11n: Tx Max. 300 Mbps IEEE802. 11g / IEEE802. 11a: Max. 11 Mbps Infrastructure mode WPA2-PSK (TKIP/AES) WPA-PSK (TKIP/AES) This device supports WPA and WPA2 encryption. WEP (64 bit / 128 bit) Transfer rate (standard) Access Mode Security MAC address and Product Identification Marking are located on the bottom of the Wireless LAN Adaptor. [. . . ]