User manual PANASONIC TX-L42DT50Y

[. . . ] Model No. TX-L42DT50Y TX-L47DT50Y TX-L55DT50Y Operating Instructions LCD Television Thank you for purchasing this Panasonic product. Please read these instructions carefully before operating this product and retain them for future reference. The images shown in this manual are for illustrative purposes only. Please refer to Pan European Guarantee Card if you need to contact your local Panasonic dealer for assistance. [. . . ] 20) Display the menu and select [Setup] select Setup access 3 Select [Display Settings] select Display Settings Access access 4 Using Data Service Application Select [Data Service Application] and set to [Auto Start On] Display Settings Data Service Application Auto Start On select access / set Notification message will appear when the application is available. Follow the onscreen instructions. Note Operations may vary depending on the broadcaster. On-screen instructions may not correspond to the remote control buttons. To check the availability of the application 1 BBC ONE WALES Coronation Street 20:00 - 20:55 Now Info 20:35 All DVB-T Channels Change category To stop the application "D" is displayed if programme has Hybrid Broadcast Broadband TV application 58 Using Common Interface The Common Interface Module menu provides access to software contained on Common Interface (CI) Modules. This function may not be available in some countries or regions. Video and audio signals may not be output depending on broadcasts or services. Although CI module may enable you to view some services, this TV does not guarantee all services (e. g. Please use only the approved CI module by the broadcaster. Consult your local Panasonic dealer or broadcasters for more information and conditions of the services. Caution Turn off Mains power On / Off switch whenever inserting or removing the CI module. If a view card and a card reader come as a set, first insert the card reader, then insert the view card into the card reader. Insert the module in the correct direction. Remove the CI module from the TV when placing the TV facing upward. This may cause damages to the CI module and CI slot. CI slot Insert or remove completely CI module Rear of the TV Insert the CI module (optional) The features that appear on screen are dependent on the contents of the selected CI module. Normally encrypted channels will appear. If encrypted channel does not appear, perform below. For more details, read the manual of the CI module, or check with the broadcaster. 1 2 Select DVB-S, DVB-C or DVB-T (p. 20) Display the menu and select [Setup] select Setup Using Common Interface access 3 Select [Common Interface] select Common Interface Access access 4 Access Common Interface and follow the on-screen instructions Common Interface Slot 1: Module inserted On-screen instructions may not correspond to the remote control buttons. 59 Shipping Condition Resets the TV to its original condition, i. e. All settings other than [USB HDD Setup] are reset (channels, picture, sound settings, etc. ). after moving house "Retuning from Setup Menu" (p. 46 - 49) 1 Display the menu and select [Setup] select Setup access 2 Select [System Menu] select System Menu Access access 3 Select [Shipping Condition] System Menu Shipping Condition Access select access Restore Settings [Shipping Condition] 1 Check the message and initialise Shipping Condition All tuning data will be erased Are you sure ?Are you sure ? 2 Follow the on-screen instructions 1 (Confirm) Reset to Factory Shipping Condition Completed. Do not turn off Shipping Condition 2 (Confirm) [Auto Setup] will automatically start. 15) 3 (Start [Shipping Condition]) 60 Updating the TV Software A new version of software may be released for download to enhance the performance or operations of the TV. [. . . ] Revocation should not affect unprotected content or content protected by other content access technologies. Content owners may require you to upgrade PlayReady to access their content. If you decline an upgrade, you will not be able to access content that requires the upgrade. 113 Licence Specifications Product fiche Manufacturer Model No. Energy efficiency class Visible screen size (diagonal) On mode average power consumption Annual energy consumption 1 Rated power consumption Standby power consumption 2 Off mode power consumption Display resolution A+ 107 cm / 42 inches 56 W 78 kWh 116 W 0. 20 W 0. 18 W 1, 920 (W) × 1, 080 (H) TX-L42DT50Y A+ 119 cm / 47 inches 69 W 95 kWh 129 W Panasonic Corporation TX-L47DT50Y A+ 139 cm / 55 inches 91 W 127 kWh 149 W TX-L55DT50Y Other information Model No. [. . . ]