User manual PANASONIC TX-L42U3E

[. . . ] Model No. TX-L32U3E TX-L37U3E TX-L42U3E Operating Instructions LCD Television Thank you for purchasing this Panasonic product. Please read these instructions carefully before operating this product and retain them for future reference. The images shown in this manual are for illustrative purposes only. Please refer to Pan European Guarantee Card if you need to contact your local Panasonic dealer for assistance. [. . . ] 30) are completed, no setting of the recorder is required. If the recorder is not compatible with Q-Link, VIERA Link or similar technologies, make timer programming of the recorder. For preparations of a recorder, read the manual of the recorder. Recordings are always in standard definition composite video via SCART, even if the original programme is in high definition. 2 minutes before the starting time, a reminder message appears if you are watching TV. To remove the message and start the programming To cancel the programming EXIT SD CARD MENU ASPECT INPUT TV AV N DIRECT TV REC EXIT 1 Select the mode you want to set (DVB-C or DVB-T) (p. 14) TV Timer Programming 2 OPTION RETURN Display the menu MENU TEXT STTL INDEX HOLD 3 Select [Setup] Main Menu Picture Sound Setup select access abc ghi pqrs jkl tuv def mno wxyz LAST VIEW 4 Select [Timer Programming] Setup Menu Timer Programming Off Timer Eco Navigation Link Settings Child Lock DVB-C Tuning Menu Language Display Settings Common Interface Access Off 1/2 select access To return to TV EXIT To unlock the tuner and stop recording EXIT 41 Set timer programming event details [Timer Programming] 1 Start making the settings 2 Select the function ([Ext Rec. ] or [Reminder]) select [Ext Rec. ] : to record the programme to the external recorder When the start time comes, the channel will be switched automatically and the video and audio signals will be output. 2 minutes before the starting time, a reminder message appears if you are watching TV. [Reminder] : to remind watching the programme When you are watching TV, a reminder message appears 2 minutes before the start time. Press the OK button to switch to the programmed channel. 3 Set the channel, date and time (repeat the operations as below) Set items in the order of 1 to 4. select the item set ghi pqrs 1, 3 and 4 can also be entered with numeric buttons. abc jkl tuv def mno wxyz : Displayed if the timer programming events are overlapped Records with subtitles (if available) To indicate this (yellow) (Press again to remove subtitles) Timer Programming Function Reminder Ext Rec. D D C Wed 27. 10. 2010 10:46 Channel Name 7 BBC7 <TIMER> 1 BBC1 <TIMER> 3 ITV1 <TIMER> --- No. Date Wed 27. 10. 2010 STTL Wed 27. 10. 2010 Thu 28. 10. 2010 --/-- Start End 17:00 18:30 (90 min. ) 18:00 20:00 (120 min. ) 21:30 22:30 (60 min. ) --:---:-- Timer Programming Ext Rec. --- 1 2 3 4 Duration (automatic display) [C] : DVB-C [D] : DVB-T You cannot change the mode within the menu. 1 Channel number 2 Date one day ahead daily or weekly (press repeatedly) 3 Starting time 4 Ending time [Daily Sun-Sat] : Sunday to Saturday [Daily Mon-Sat] : Monday to Saturday [Daily Mon-Fri] : Monday to Friday [Weekly Sat/Fri/Thu/Wed/Tue/Mon/Sun] : Same time on the same day every week 4 Store 42 To change a timer programming event Select the programme to be changed select Correct as necessary (p. 42) access To record with subtitles (if available) Select the programme to record with subtitles (yellow) Each time pressed : auto off To cancel a timer programming event Select the programme to be deleted (red) To cancel a timer programming event temporarily Select the programme to be cancelled (blue) Each time pressed : cancel stop cancelling Note Check that the LED is orange. If not, timer programmes are not active or not stored. Timer Programming reminder messages will remain displayed until one of the following occurs : You press the OK button to view the programme or the EXIT button to cancel the reminder. The timer programming event that the reminder is set for ends. "!" identifies that any timer programming events have overlapped. [Ext Rec. ] is given priority over [Reminder]. As for the overlapped two or more [Ext Rec. ], the first timer programming event starts and finishes as programmed. The next timer programming event can then start. The recording of Timer Programming will automatically change to the programmed channel 10 seconds before the start time. To stop recording the timer programming event directly prior to the start time, it may be necessary to stop the recorder manually. [. . . ] If the problem persists, contact your local Panasonic dealer or the authorized Service Centre. 73 Specifications TX-L32U3E Power Source Rated Power Consumption AC 220-240 V, 50Hz 94 W 0. 3 W Standby Power Consumption 11. 5 W (With monitor out recording) 779 mm × 531 mm × 207 mm (With Pedestal) 779 mm × 497 mm × 84 mm (TV only) 9. 5 kg Net (With Pedestal) 8. 5 kg Net (TV only) Aspect Ratio Visible screen size Number of pixels Speaker Sound Audio Output Headphones 16:9 80 cm (diagonal) 697 mm (W) × 392 mm (H) 94 cm (diagonal) 819 mm (W) × 460 mm (H) 106 cm (diagonal) 930 mm (W) × 523 mm (H) 137 W 0. 3 W 11. 5 W (With monitor out recording) 896 mm × 598 mm × 266 mm (With Pedestal) 896 mm × 564 mm × 88 mm (TV only) 13. 5 kg Net (With Pedestal) 12. 0 kg Net (TV only) 179 W 0. 25 W 10. 0 W (With monitor out recording) 1, 021 mm × 666mm × 288 mm (With Pedestal) 1, 021 mm × 632 mm × 106 mm (TV only) 18. 5 kg Net (With Pedestal) 16. 5 kg Net (TV only) TX-L37U3E TX-L42U3E Dimensions (W × H × D) Mass Display panel 2, 073, 600 (1, 920 (W) × 1, 080 (H)) (160 mm × 42 mm) × 2, 8 : 20 W (10 W + 10 W) M3 (3. 5 mm) stereo mini Jack × 1 PAL B, G, H, I, SECAM B, G, SECAM L, L' VHF E2 - E12 VHF A - H (ITALY) CATV (S01 - S05) CATV S11 - S20 (U1 - U10) VHF R1 - R2 VHF R3 - R5 VHF H1 - H2 (ITALY) UHF E21 - E69 CATV S1 - S10 (M1 - M10) CATV S21 - S41 (Hyperband) VHF R6 - R12 UHF E21 - E69 Receiving Systems / Band name Check the latest information on the available services at the following website. (English only) http://panasonic. jp/support/ global/cs/tv/ PAL D, K, SECAM D, K PAL 525/60 M. NTSC NTSC (AV input only) DVB-T DVB-C Playback of NTSC tape from some PAL Video recorders (VCR) Playback from M. NTSC Video recorders (VCR) Playback from NTSC Video recorders (VCR) Digital terrestrial services (MPEG2 and MPEG4-AVC(H. 264)) Digital cable services (MPEG2 and MPEG4-AVC(H. 264)) Specifications Aerial input Operating Conditions VHF / UHF Temperature : 0 °C - 35 °C Humidity : 20 % - 80 % RH (non-condensing) 74 AV1 (SCART) AV2 input COMPONENT input HDMI 1 / 2 input Card slot DIGITAL AUDIO OUT Connection Terminals 21 Pin terminal (Audio/Video in, Audio/Video out, RGB in, Q-Link) VIDEO AUDIO L - R Y PB, PR RCA PIN Type × 1 RCA PIN Type × 2 1. 0 V[p-p] (including synchronization) ±0. 35 V[p-p] 1. 0 V[p-p] (75 :) 0. 5 V[rms] TYPE A Connectors HDMI2 : HDMI (Version 1. 4 with Audio Return Channel), This TV supports "HDAVI Control 5" function. SD Card slot × 1 Common Interface slot (complies with CI Plus) × 1 PCM / Dolby Digital / DTS, Fiber optic Note Design and Specifications are subject to change without notice. Mass and Dimensions shown are approximate. [. . . ]