User manual PANASONIC TX-L47WT50E

[. . . ] TX-L42WT50E TX-L47WT50E TX-L55WT50E Operating Instructions LCD Television Thank you for purchasing this Panasonic product. Please read these instructions carefully before operating this product and retain them for future reference. The images shown in this manual are for illustrative purposes only. Please refer to Pan European Guarantee Card if you need to contact your local Panasonic dealer for assistance. [. . . ] Caution Turn off Mains power On / Off switch whenever inserting or removing the CI module. If a view card and a card reader come as a set, first insert the card reader, then insert the view card into the card reader. Insert the module in the correct direction. Remove the CI module from the TV when placing the TV facing upward. This may cause damages to the CI module and CI slot. CI slot Insert or remove completely CI module Rear of the TV Insert the CI module (optional) The features that appear on screen are dependent on the contents of the selected CI module. For more details, read the manual of the CI module, or check with the broadcaster. 1 2 Select DVB-S , DVB-C or DVB-T (p. 21) Display the menu and select [Setup] select Using Common Interface Setup access 3 Select [Common Interface] select Common Interface Access access 4 Access Common Interface and follow the on-screen instructions Common Interface Slot 1: Module inserted On-screen instructions may not correspond to the remote control buttons. 63 Shipping Condition Resets the TV to its original condition, i. All settings other than [USB HDD Setup] are reset (channels, picture, sound settings, etc. After moving house "Retuning from Setup Menu" (p. 50 - 53) 1 Display the menu and select [Setup] select Setup access 2 Select [System Menu] select System Menu Access access 3 Select [Shipping Condition] System Menu Shipping Condition Access select access Restore Settings [Shipping Condition] 1 Check the message and initialise Shipping Condition All tuning data will be erased Are you sure ?16) 3 (Start [Shipping Condition]) 64 Updating the TV Software A new version of software may be released for download to enhance the performance or operations of the TV. If there is an update available, a notification message is displayed when the channel has the update information. To download (Press the EXIT button not to download) You can update new software automatically or update manually. 1 Display the menu and select [Setup] select Setup access 2 Select [System Menu] select System Menu Access access 3 Select [System Update] System Menu System Update Access select access Update TV's software system [System Update] To update automatically Select [Auto Update Search in Standby] System Update Auto Update Search in Standby Off System Update Search Now Updating the TV Software select access / store If System Update is performed, the software will be updated (it may change TV functions). If you do not want to do so, set [Auto Update Search in Standby] to [Off]. Every time you set, the TV automatically performs a search in Standby and downloads an update, if any software updates are available. The automatic updating is performed under the following conditions: Standby (TV turned off with the remote control) Recording of Timer Programming, Direct TV Recording or One Touch Recording is not in progress. To update immediately 1 Select [System Update Search Now] System Update Auto Update Search in Standby Off System Update Search Now Access 2 Searches for an update (for select access several minutes) and displays a corresponding message if any 3 Download Note Download may take for about 60 minutes. During software download and update, DO NOT switch off the TV. [. . . ] specifications Product fiche Manufacturer Model No. Energy efficiency class Visible screen size (diagonal) On mode average power consumption Annual energy consumption 1 Rated power consumption Standby power consumption 5 mm) stereo mini Jack × 1 PAL B, G, H, I, SECAM B, G, SECAM L, L' PAL D, K, SECAM D, K PAL 525/60 VHF E2 - E12 VHF A - H (ITALY) CATV (S01 - S05) CATV S11 - S20 (U1 - U10) VHF R1 - R2 VHF R6 - R12 VHF H1 - H2 (ITALY) UHF E21 - E69 CATV S1 - S10 (M1 - M10) CATV S21 - S41 (Hyperband) VHF R3 - R5 UHF E21 - E69 PP î Playback of NTSC tape from some PAL Video recorders (VCR) Playback from M. 0 Receiving systems / Band name Check the latest information on the available services at the following website. 1: Energy consumption XYZ kWh per year, based on the power consumption of the television operating 4 hours per day for 365 days. [. . . ]