User manual PANASONIC TXP42GT60E

[. . . ] Consult your local dealer for availability of DVB-T or DVB-S services in your area. Consult your cable service provider for availability of DVB-C services with this TV. This TV may not work correctly with the signal which does not meet the standards of DVB-T, DVB-C or DVB-S. Not all the features are available depending on the country, area, broadcaster, service provider and satellite. [. . . ] 50) erases the PIN number and all settings. Note 47 Advanced Input Labels For easier identification and selection of the input mode, you can label each input mode or skip terminal that is not connected to any equipment. To select the input mode p. 24 MENU EXIT 1 2 3 Display the menu MENU Select "Setup" Main Menu Picture Sound Setup access select BACK/ RETURN Select "Display Settings" Setup Menu Timer Programming Off Timer USB HDD Setup Link Settings Child Lock DVB-C Tuning Menu Language Display Settings Common Interface 1/2 Off access select Access 4 Select "Input Labels" Display Settings Preferred Subtitle Type Teletext Teletext Character Set Side Panel Default Guide Input Labels Banner Display Timeout Playing Time Display Radio Mode access Standard TOP West Off TV Guide Access 3 seconds On Off select TV 5 Select a input terminal and set Input Labels AV1 AV2/S AV3 COMPONENT PC HDMI1 HDMI2 HDMI3 HDMI4 Input Labels DVB-S DVB-C DVB-T Analogue 1/2 DVD AV2/S AV3 COMPONENT PC HDMI1 HDMI2 HDMI3 HDMI4 2/2 DVB-S DVB-C DVB-T Analogue set select To return to TV EXIT The labels you set will be displayed in "Input Selection" menu (p. If "Skip" is selected, you cannot select the mode. User input You can name each input mode freely. Set characters one by one User input Name A U a u B V b v C W c w D X d x EFG YZ efg yz( H I JKLMNOPQRST 0123456789!:# h i j k lmnopqr s t )+-. *_ Select "User input" select access Store select set BACK/ RETURN (maximum: ten characters) You can set characters by using numeric buttons. "Characters table for numeric buttons" (p. 90) 48 Using Common Interface The Common Interface Module menu provides access to software contained on Common Interface (CI) Modules. This function may not be available in some countries or regions. Video and audio signals may not be output depending on broadcasts or services. Although CI module may enable you to view some services, this TV does not guarantee all services (e. g. Please use only the approved CI module by the broadcaster. Consult your local Panasonic dealer or broadcasters for more information and conditions of the services. Turn Off Mains power On / Off switch whenever inserting Caution or removing the CI module. If a view card and a card reader come as a set, first insert the card reader, then insert the view card into the card reader. Insert the module in the correct direction. Side of the TV CI slot Insert or remove straightly and completely CI module Insert the CI module (optional) The features that appear on screen are dependent on the contents of the selected CI module. For more details, see the manual of the CI module, or check with the broadcaster. 86 INPUT TV AV 1 2 Select the external input AV Select "PC" Input Selection AV1 AV2/S AV3 COMPONENT PC HDMI1 HDMI2 HDMI3 HDMI4 TV Media Server access select Displaying PC Screen on TV Multi Window Corresponding signals p. 92 If "H-freq. " or "V-freq. " is shown in red, the signals may not be supported. To return to TV TV PC menu setting To make settings Advanced Settings PC Setup Menu "How to Use Menu Functions" to (p. 27) Item R-Gain G-Gain B-Gain R-Cutoff G-Cutoff B-Cutoff Gamma Reset to Defaults Input Resolution Clock H-pos Adjustments / Configurations (options) Adjusts the white balance of bright red area Adjusts the white balance of bright green area Adjusts the white balance of bright blue area Adjusts the white balance of dark red area Adjusts the white balance of dark green area Adjusts the white balance of dark blue area Switches the gamma curve (S Curve / 1. 8 / 2. 0 / 2. 2 / 2. 4 / 2. 6) Press the OK button to reset to the default Advanced Settings Switches to a wide view VGA (640 × 480 pixels), WVGA (852 × 480 pixels), XGA (1, 024 × 768 pixels), WXGA (1, 280 × 768 pixels, 1, 366 × 768 pixels) Options change depending on signals Set to the minimum level if noise occurs Adjusts horizontal position Other items Note For HDMI-compatible PC, possible to connect to HDMI terminals (HDMI1 / HDMI2 / HDMI3 / HDMI4) by using HDMI cable (p. 91). Picture Setup Advanced Adjusts vertical position V-pos Eliminates flicker and distortion Adjust after Clock adjustment Set to the minimum level if noise occurs Chooses another synchronous signal if the image is distorted (H & V / On Green) H & V : by the horizontal and vertical signals from your PC Sync On Green : by the green signal from your PC (if available) Reset to Defaults Press the OK button to reset to the default PC Setup settings Clock Phase p. 28 - 33 53 Advanced Picture Settings You can adjust and setup the detailed picture settings for each input and Viewing Mode. To use this function completely, set "Advance(isfccc)" to "On" in the Setup Menu. 33 For PC input mode, some functions are available without setting "Advance(isfccc)". Select the input mode to adjust and setup 1 2 3 4 p. 24 AV INPUT TV AV MENU EXIT TV Display the menu MENU Select "Picture" Main Menu Picture Sound Setup access select Select "Viewing Mode" and set the mode Picture Menu Viewing Mode Contrast Brightness Colour Sharpness Colour Balance Vivid Colour Eco Mode P-NR 1/2 Dynamic 60 0 30 5 Warm Off Off Off abc ghi pqrs jkl tuv def mno wxyz set select 5 Select one of the following functions Picture Menu Picture in Picture Panel Advanced Settings Lock Settings Copy Adjustment Reset to Defaults 2/2 On Access Access Access Reset access select "Copy Adjustment" is available when To return to TV EXIT "Viewing Mode" in the Picture Menu is set to "Professional1" or "Professional2". 6 Set Lock the picture setting Lock Settings Advanced Settings can be locked for each Viewing Mode and input. Additionally, Contrast, Brightness, Colour, Sharpness, Tint and Reset to Defaults in the Picture Menu can be locked for "Professional1" and "Professional2". Enter the PIN number (4 digits) Lock Settings-PIN Entry Please enter new PIN PIN abc def mno wxyz **** ghi pqrs jkl tuv Enter the PIN number twice at first setting. Make a note of the PIN number in case you forget it. Select "Adjustment Lock" and set to "On" Lock Settings Change PIN Adjustment Lock On To change the PIN number Select "Change PIN" Lock Settings Change PIN Adjustment Lock Access On set select Enter a new PIN number twice access ghi abc jkl tuv def mno wxyz select pqrs 54 Adjust the detailed picture settings Advanced Settings To make settings Advanced Settings R-Gain G-Gain B-Gain R-Cutoff G-Cutoff B-Cutoff Gamma Reset to Defaults "How to Use Menu Functions" to (p. 27) 2. 2 Reset Menu Advanced Settings Advanced Settings Item R-Gain G-Gain B-Gain R-Cutoff G-Cutoff B-Cutoff Gamma Reset to Defaults Adjustments / Configurations (alternatives) Adjusts the white balance of bright red area Adjusts the white balance of bright green area Adjusts the white balance of bright blue area Adjusts the white balance of dark red area Adjusts the white balance of dark green area Adjusts the white balance of dark blue area Switches the gamma curve (S Curve / 1. 8 / 2. 0 / 2. 2 / 2. 4 / 2. 6) Press the OK button to reset to the default Advanced Settings For the mode of "Professional1" or "Professional2" in "Viewing Mode" White Balance White Balance R-Gain G-Gain B-Gain R-Cutoff G-Cutoff B-Cutoff Reset to Defaults Advanced Settings White Balance Colour Management Gamma Menu White Balance Copy the settings to the other input Copy Adjustment You can copy the selected "Professional1" or "Professional2" settings to that of the other input. [. . . ] DivX® is a registered trademark of DivX, Inc. , and is used under license. YouTube and Picasa are trademarks of Google, Inc. SkypeTM is a trademark of Skype Limited. 96 Specifications Wireless LAN Adaptor Dimensions (W × H × D) Mass Antenna Interface Standard Compliance Transmission system 44 mm × 27 mm × 72 mm 29 Net Tx 1, Rx 2 USB2. 0 IEEE802. 11n / IEEE802. 11a / IEEE802. 11g / IEEE802. 11b MISO-OFDM system, OFDM system, DSSS system IEEE802. 11n / IEEE802. 11a: 5. 15 GHz - 5. 35 GHz 5. 47 GHz - 5. 725 GHz IEEE802. 11g / IEEE802. 11b / IEEE802. 11n: 2. 4 GHz - 2. 4835 GHz IEEE802. 11n: Tx Max. 300 Mbps IEEE802. 11g / IEEE802. 11a: Max. [. . . ]