User manual PANASONIC TX-P50C3E

[. . . ] Model No. TX-P42C3E TX-P50C3E Operating Instructions Plasma Television Thank you for purchasing this Panasonic product. Please read these instructions carefully before operating this product and retain them for future reference. The images shown in this manual are for illustrative purposes only. Please refer to Pan European Guarantee Card if you need to contact your local Panasonic dealer for assistance. [. . . ] This function is available only for DVB-C signal. · 38 Tuning and Editing Channels (Analogue) You can retune channels or skip unwanted channels, edit channels etc. SD CARD MENU ASPECT INPUT TV AV N DIRECT TV REC EXIT 1 2 Select Analogue (p. 14) TV Display the menu MENU OPTION RETURN 3 TEXT STTL INDEX HOLD Select [Setup] Main Menu Picture Sound select access abc ghi pqrs jkl tuv def mno wxyz Setup 4 Select [Analogue Tuning Menu] Setup Menu Analogue Tuning Menu Access select access LAST VIEW PROGRAMME 5 Select one of the following functions Analogue Tuning Menu Channel List Auto Setup Manual Tuning Access Access Access select access REC TV · · Tuning and Editing Channels (Analogue) The function items vary depending on the country you select (p. [Auto Setup] "Retuning from Setup Menu" (p. 35) To return to TV EXIT Skip unwanted Analogue channels, Edit Analogue channels [Channel List] You can hide unwanted Analogue channels. The hidden channels cannot be displayed except in this function. Use this function to skip unwanted channels. Select a channel and reveal / hide Analogue Channel List 1 2 3 4 5 6 7 BBC1 ***** ***** ***** ***** ***** ***** select [Reveal] / [Hide] : [Reveal] : [Hide] (skip) · To reveal all channels (yellow) 39 To edit channels You can also edit each channel in Channel List. To retune each channel ([Manual Tuning]) · · (red) (see below) To move the channel position Select the new position (green) Store (green) · To rename the channel name (blue) A U a u Set characters (maximum : five characters) Edit channel name Name BCD VWX bcd vwx E Y e y FGHI Z 01 fghi z()+ J 2 j K 3 k . lmnopqr *_ S : s T # t Store select set RETURN use numeric · To "Characters buttons numeric buttons" (p. 70) table for Channel position Channel name 3 ITV itv CH23 23:35 All Analogue Channels · If a VCR is connected only with the RF cable, edit [VCR]. Set Analogue channel manually [Manual Tuning] [Fine Tuning] Use to make small adjustments to the tuning of an individual programme (affected by weather conditions, etc. ) Note Tuning and Editing Channels (Analogue) [Manual Tuning] Set Analogue channel manually after Auto Setup. Set [Sound System] and [Colour System], and then perform this function. If a VCR is connected only with the RF cable, select channel position [0]. · · Analogue Manual Tuning 1 BBC1 Fine Tuning Manual Tuning Sound System Colour System CH33 2 78 1 SC1 Auto 41 SC1 : PAL B, G, H / SECAM B, G SC2 : PAL I SC3 : PAL D, K / SECAM D, K F : SECAM L, L' 1 Select the channel position abc ghi pqrs jkl tuv def mno wxyz 2 Select the channel 3 Search and store search store 40 Timer Programming Timer Programming from Menu The Timer Programming menu allows you to choose programmes that you wish to remind watching or record to the external recorder. At the correct time, the TV will tune to the correct channel even if the TV is in Standby mode. TV Guide may also be used to set timer programming event (p. This function is not available in Analogue mode. Timer Programming can store up to 15 events. Timer Programming only works reliably if correct time information is received via the signal from the broadcaster or service provider. For recording using Timer Programming, the TV must be either On or in standby. For reminders to be displayed, the TV must be On. No other channel can be selected while the recording of Timer Programming is in progress. It may not be possible to record an encrypted programme (which is copy-protected). When recording programmes to the external recorder, be sure to make the proper settings on the recorder connected to the TV. [. . . ] of the front, top rear panels · Even when the temperature of partsproblems in termsandperformancehas risen, these temperature rises will not pose any of or quality. production process · Due toare permanently lit orinvolved in this technology this may result in some pixels which unlit. · Followproblem persists, contact your local Panasonic dealer or the authorized Service · If the Centre. Pictures from external equipment are unusual when the equipment is connected via HDMI The TV does not switch On The TV goes into Standby mode The remote control does not work or is intermittent Frequently Asked Questions Parts of the TV become hot Permanently lit spots on screen An error message appears 73 Specifications TX-P42C3E Power Source Rated Power Consumption On mode Average Power Consumption (based on IEC 62087 Ed. 2 measurement method) Standby Power Consumption Dimensions (W × H × D) Mass Display panel Sound Aspect Ratio Visible screen size Number of pixels Speaker Audio Output Headphones AC 220-240 V, 50 / 60 Hz 150 W 200 W TX-P50C3E 92 W 0. 40 W 15. 00 W (With monitor out recording) 1, 023 mm × 671 mm × 288 mm (With Pedestal) 1, 023 mm × 637 mm × 93 mm (TV only) 26. 5 k Net (With Pedestal) 23. 5 k Net (TV only) 16:9 106 cm (diagonal) 921 mm (W) × 518 mm (H) 123 W 1, 212 mm × 782 mm × 324 mm (With Pedestal) 1, 212 mm × 747 mm × 93 mm (TV only) 34. 0 k Net (With Pedestal) 30. 5 k Net (TV only) 127 cm (diagonal) 1, 105 mm (W) × 622 mm (H) 786, 432 (1, 024 (W) × 768 (H)) [3, 072 × 768 dots] (160 mm × 40 mm) × 2, 6 20 W (10 W + 10 W) M3 (3. 5 mm) stereo mini Jack × 1 PAL B, G, H, I, SECAM B, G, SECAM L, L' PAL D, K, SECAM D, K PAL 525/60 M. NTSC DVB-T DVB-C VHF / UHF Temperature : 0 °C - 35 °C Humidity : 20 % - 80 % RH (non-condensing) VHF E2 - E12 VHF A - H (ITALY) CATV (S01 - S05) CATV S11 - S20 (U1 - U10) VHF R1 - R2 VHF R6 - R12 VHF H1 - H2 (ITALY) UHF E21 - E69 CATV S1 - S10 (M1 - M10) CATV S21 - S41 (Hyperband) VHF R3 - R5 UHF E21 - E69 Receiving Systems / Band name Check the latest information on the available services at the following website. (English only) http://panasonic. jp/support/ global/cs/tv/ Playback of NTSC tape from some PAL Video recorders (VCR) Playback from M. NTSC Video recorders (VCR) Digital terrestrial services (MPEG2 and MPEG4-AVC(H. 264)) Digital cable services (MPEG2 and MPEG4-AVC(H. 264)) NTSC (AV input only) Playback from NTSC Video recorders (VCR) Aerial input Specifications Operating Conditions 74 AV1 (SCART) AV2 input COMPONENT input Connection Terminals 21 Pin terminal (Audio/Video in, Audio/Video out, RGB in, Q-Link) VIDEO AUDIO L - R Y PB, PR RCA PIN Type × 1 RCA PIN Type × 2 1. 0 V[p-p] (including synchronization) ±0. 35 V[p-p] 1. 0 V[p-p] (75 ) 0. 5 V[rms] HDMI 1 / 2 input · Card slot DIGITAL AUDIO OUT TYPE A Connectors HDMI1 : HDMI (Version 1. 3 with Deep Colour, x. v. ColourTM) HDMI2 : HDMI (Version 1. 4 with Audio Return Channel), Deep Colour, x. v. ColourTM This TV supports "HDAVI Control 5" function. [. . . ]