User manual PANASONIC TX-P50VT50J

[. . . ] Model No. TX-P50VT50J TX-P55VT50J TX-P65VT50J Operating Instructions Plasma Television Thank you for purchasing this Panasonic product. Please read these instructions carefully before operating this product and retain them for future reference. The images shown in this manual are for illustrative purposes only. Please refer to Pan European Guarantee Card if you need to contact your local Panasonic dealer for assistance. [. . . ] If you do not want to do so, set [Auto Update Search in Standby] to [Off]. To update immediately 1 Select [System Update Search Now] System Update Auto Update Search in Standby Off Access System Update Search Now 2 Searches for an update (for select access several minutes) and displays a corresponding message if any 3 Download Note Download may take for about 60 minutes. During software download and update, DO NOT switch off the TV. The notification message might be a reminder. In this case, the schedule information (the date that the new version can be used) will appear. The update will not start when the TV is off. 66 Multi Window Enjoy viewing the digital TV programme and external input (AV, Component or HDMI) at once. 1 Display the menu and select [Picture] select Picture access 2 Select [Picture in Picture] select Picture in Picture Access access Remote control operations apply to the main screen. 1 DVB-T Main screen AV1 EXIT PandP Swap Sub screen How to operate in multi window Display the colour bar if it is not displayed Picture-in-Picture mode [PinP] 1 DVB-T Picture-and-Picture mode [PandP] 1 DVB-T AV1 (yellow) Multi Window AV1 (green) EXIT PinP Swap EXIT PandP Swap (blue) AV1 To exit multi window (red) To change the input mode or channel of sub screen 1 Swap sub screen 2 Change the input mode for main screen (blue) 1 DVB-T or channel by the remote control (p. 21, 30) 3 Swap again (blue) EXIT PandP Swap Colour bar Note Each input mode can only be displayed either on main screen or sub screen. The sound comes from only the main screen in multi window. You cannot change the aspect ratio in multi window. HDMI is available only for main screen. Some signals are reformatted for suitable viewing on your display. 67 Advanced Picture Settings You can adjust and setup the detailed picture settings for each input and Viewing Mode (except THX modes). To use this function completely, set [Advance(isfccc)] to [On] in the Setup Menu. 49) 1 2 Select the input mode to adjust and setup (p. 21, 30) Display the menu and select [Picture] select Picture access 3 Select [Viewing Mode] and set the mode select Viewing Mode Dynamic access / store 4 Select one of the following functions select Colour Gamut Advanced Settings Lock Settings Copy Adjustment Remaster Access Access Access access [Colour Gamut] is available when [Viewing Mode] is set to [Professional1] or [Professional2]. (For HDMI input or video contents of Media Player) [Copy Adjustment] is available when [Viewing Mode] is set to [Professional1] or [Professional2]. Advanced Picture Settings Adjust the detailed picture settings [Colour Gamut], [Advanced Settings] select adjust access / store [Colour Management] and [More Detailed Adjustment] are available when [Viewing Mode] in the Picture Menu is set to [Professional1] or [Professional2]. Menu Item Adjustments / Configurations (alternatives) Reproduces image colour precisely according to the colour gamut standards [Remaster] / [Rec. 709] / [SMPTE-C] / [EBU] [Remaster]: Displays deep colours by expanding the colour gamut at a maximum. 709]: Standard for HD (High definition) [SMPTE-C]: Standard for NTSC [EBU]: Standard for PAL Adjusts the white balance of bright red / green / blue area Adjusts the white balance of dark red / green / blue area Adjusts more detailed White Balance items [Input Signal Level]: Adjusts the input signal level. [R-Gain] / [G-Gain] / [B-Gain]: Adjusts the detailed white balance of bright red / green / blue area. [Reset to Defaults]: Press the OK button to reset to the default detailed White Balance. Press the OK button to reset to the default White Balance Colour Gamut R-Gain, G-Gain, B-Gain Picture R-Cutoff, G-Cutoff, B-Cutoff White Balance Advanced Settings More Detailed Adjustment Reset to Defaults 68 Menu Item R-Hue, G-Hue, B-Hue R-Saturation, G-Saturation, B-Saturation R-Luminance, G-Luminance, B-Luminance Colour Management Adjustments / Configurations (alternatives) Adjusts the picture hue of red / green / blue area Adjusts the saturation of red / green / blue area Adjusts the luminance of red / green / blue area Adjusts more detailed Colour Management items [Y-Hue] / [C-Hue] / [M-Hue]: Adjusts the picture hue of yellow / cyan / magenta area. [Y-Saturation] / [C-Saturation] / [M-Saturation]: Adjusts the saturation of yellow / cyan / magenta area. [Y-Luminance] / [C-Luminance] / [M-Luminance]: Adjusts the luminance of yellow / cyan / magenta area. [Reset to Defaults]: Press the OK button to reset to the default detailed Colour Management. [. . . ] Energy efficiency class Visible screen size (diagonal) On mode average power consumption Annual energy consumption1 Rated power consumption Standby power consumption2 Off mode power consumption Display resolution C 127 cm / 50 inches 195 W 270 kWh 410 W 0. 30 W 0. 25 W 1, 920 (W) × 1, 080 (H) TX-P50VT50J C 140 cm / 55 inches 228 W 333 kWh 430 W Panasonic Corporation TX-P55VT50J C 165 cm / 65 inches 305 W 445 kWh 520 W TX-P65VT50J 121 Licence | Specifications Other information Model No. Power source Panel TX-P50VT50J AC 220-240 V, 50 / 60 Hz Plasma panel 1, 171 mm × 754 mm × 335 mm (With Pedestal) 1, 171 mm × 706 mm × 50 mm (TV only) 29. 5 25. 5 Speaker Audio output Headphones 1, 286 mm × 819 mm × 357 mm (With Pedestal) 1, 286 mm × 771 mm × 50 mm (TV only) 1, 499 mm × 939 mm × 400 mm (With Pedestal) 1, 499 mm × 891 mm × 50. 5 mm (TV only) Net (With Pedestal) Net (TV only) TX-P55VT50J TX-P65VT50J Dimensions (W × H × D) Mass Net (With Pedestal) 36. 0 31. 5 Net (TV only) Net (With Pedestal) 48. 0 42. 5 Net (TV only) Front speaker (8 train speakers) × 2 Woofer ( 80 mm) × 1 18 W (4 W + 4 W + 10 W) M3 (3. 5 mm) stereo mini Jack × 1 PAL B, G, H, I, SECAM B, G, SECAM L, L' PAL D, K, SECAM D, K PAL 525/60 VHF E2 - E12 VHF A - H (ITALY) CATV (S01 - S05) CATV S11 - S20 (U1 - U10) VHF R1 - R2 VHF R6 - R12 VHF H1 - H2 (ITALY) UHF E21 - E69 CATV S1 - S10 (M1 - M10) CATV S21 - S41 (Hyperband) VHF R3 - R5 UHF E21 - E69 Woofer ( 100 mm) × 1 Receiving systems / Band name Check the latest information on the available services at the following website. (English only) http://panasonic. jp/support/ global/cs/tv/ Satellite dish input Aerial input Operating conditions Sound Playback of NTSC tape from some PAL Video recorders (VCR) Playback from M. NTSC Video recorders (VCR) Playback from NTSC Video recorders (VCR) Digital terrestrial services (MPEG2 and MPEG4-AVC(H. 264)) Digital cable services (MPEG2 and MPEG4-AVC(H. 264)) Digital satellite services (MPEG2 and MPEG4-AVC(H. 264)) Receiver frequency range - 950 MHz to 2, 150 MHz LNB Power and Polarisation - Vertical: +13 V / Horizontal: +18 V / Current: Max. 500 mA (overload protection) 22 kHz Tone - Frequency: 22 kHz ± 2 kHz / Amplitude: 0. 6 V ± 0. 2 V Symbol Rate - Max. [. . . ]