User manual PANASONIC TX-P65ST50Y

[. . . ] TX-P42ST50Y TX-P50ST50Y TX-P55ST50Y TX-P65ST50Y Operating Instructions Plasma Television Thank you for purchasing this Panasonic product. Please read these instructions carefully before operating this product and retain them for future reference. The images shown in this manual are for illustrative purposes only. Please refer to Pan European Guarantee Card if you need to contact your local Panasonic dealer for assistance. [. . . ] 59 Advanced Picture Settings You can adjust and setup the detailed picture settings for each input and Viewing Mode. To use this function completely, set [Advance] to [On] in the Setup Menu. 20, 29) Display the menu and select [Picture] select Picture access 3 Select [Viewing Mode] and set the mode select Viewing Mode Dynamic access / store 4 Select [Advanced Settings] select Advanced Settings Access access Adjust the detailed picture settings [Advanced Settings] Advanced Settings White Balance Colour Management Gamma Access Access Access select adjust access / store [Colour Management] is available when [Viewing Mode] in the Picture Menu is set to [True Cinema]. Advanced Picture Settings Menu White Balance Advanced Settings Colour Management Item R-Gain, G-Gain, B-Gain R-Cutoff, G-Cutoff, B-Cutoff Reset to Defaults R-Hue, G-Hue, B-Hue R-Saturation, G-Saturation, B-Saturation R-Luminance, G-Luminance, B-Luminance Reset to Defaults Gamma Gamma Reset to Defaults Adjustments / Configurations (alternatives) Adjusts the white balance of bright red / green / blue area Adjusts the white balance of dark red / green / blue area Press the OK button to reset to the default White Balance Adjusts the picture hue of red / green / blue area Adjusts the saturation of red / green / blue area Picture Adjusts the luminance of red / green / blue area Press the OK button to reset to the default Colour Management Switches the gamma curve [S Curve] / [1. 6] Please note the numerical values are reference for the adjustment. Press the OK button to reset to the default Gamma 60 USB HDD Recording You can record the digital TV programmes to the connected USB HDD and enjoy playing back in various ways. Analogue TV programme cannot be recorded on the USB HDD. ), radio broadcasting and the periods without any signal will not be recorded. Not all the programmes can be recorded depending on the broadcaster and service provider. You cannot copy the recorded contents of the USB HDD. 100) Caution All data in the USB HDD will be erased in the following cases: "Setting for USB HDD" (see below) · When formatting the USB HDD with this TV · When formatting the USB HDD to use on PC, etc. When the TV is repaired due to a malfunction, you may have to format the USB HDD again with this TV to use it. (All data will be erased when formatting. ) In order to use the USB HDD with your PC after recording with this TV, format it again on your PC. (Special operations or tools may be necessary to format on your PC. For details, read the manual of the USB HDD. ) The data recorded on the USB HDD with this TV can only be played back on this TV. You cannot play back its contents with another TV (including the TV of the same model number) or any equipment. Do not turn the TV off, pull out the mains plug or remove the USB HDD during operation (formatting, recording, etc. It may cause malfunction of the device or damage the recorded data. ) Preparation for USB HDD Connect the USB HDD to the USB 1 port with the USB cable. Be sure to connect the USB HDD to the socket outlet. [. . . ] specifications Product fiche Manufacturer Model No. Energy efficiency class Visible screen size (diagonal) On mode average power consumption Annual energy consumption1 Rated power consumption Standby power consumption2 Off mode power consumption Display resolution C 107 cm / 42 inches 133 W 194 kWh 295 W 0. 0 Net Net TV only With Pedestal TV only Speaker Audio output Headphones Front speaker (8 train speakers) × 2 Woofer ( 80 mm) × 1 18 W (4 W + 4 W + 10 W) M3 (3. 5 V[rms] VHF E2 - E12 VHF A - H (ITALY) CATV (S01 - S05) CATV S11 - S20 (U1 - U10) VHF R1 - R2 VHF R6 - R12 VHF H1 - H2 (ITALY) UHF E21 - E69 CATV S1 - S10 (M1 - M10) CATV S21 - S41 (Hyperband) VHF R3 - R5 UHF E21 - E69 Woofer ( 100 mm) × 1 Receiving systems / Band name Check the latest information on the available services at the following website. [. . . ]