User manual PANASONIC TY-42PX20U

[. . . ] Slightly lift the left and right sides of the plasma TV and remove the corner protection pads attached to the bottom. using assembly screws (black screws) (× 4) 2. Fasten the plasma TV and support poles Position by placing your hands at the points indicated in the illustration. Lift and remove Support pole (Left) Corner protection pad Plus (Phillips) (+) screwdriver IMPORTANT A study of the assembly instructions will not only save you time, but may prevent possible damage to your new stand. [. . . ] Description 1 TBLA0116 Top crosspiece 1 TBLH0548 Bottom panel 1 TBLA0104 Side panel (Left) Side panel (Right) 1 TBLA0103 1 TBLB3080 Rear cord cover 1 TKGA0127 Glass shelf 1 TBLA3184 Cord holder TY-S50PX20U Part No. TBLA0117 TBLH0550 TBLA0104 TBLA0103 TBLB3110 TKGA0129 TBLA3217 TBLA3194 × 2 Replacement parts Bottom cap (Right) TBLA3195 × 2 TBLB3074 × 4 Bottom cap (Left) Screws TBLB3107 × 1 TBLB3108 × 1 XTB4+10B × 4 When making a part (s) inquiry or for out of warranty purchases please quote part no. & description. PANASONIC SERVICES COMPANY 20421 84th Avenue South, Kent, Washington 98032 Tel. : 1-800-833-9626 Fax : 1-800-237-9080 2003 Matsushita Electric Industrial Co. , Ltd. Unauthorized copying and distribution is a violation of law. To maintain appearance we recommend the following: Painted Surfaces:Use a damp cloth for cleaning. Do not use any abrasive or chemically treated cleaners. NOTE: As with all indoor furniture, this unit should not be exposed to direct sunlight, extreme temperatures or moisture, as this can result in serious irreparable damage. Panasonic Canada Inc. 5770 Ambler Drive, Mississauga, Ontario L4W 2T3 Tel. : (905) 624-8447 2003 Matsushita Electric Industeial Co. , Ltd. Unauthorized copying and distribution is a violation of law. For improvement purposes, design and specifications are subject to change without notice. TQZH507 Printed in Japan Assembly & Placement Manual Assembly TY-S42PX20U Model No. TY-S50PX20U STEP 1 Attaching of bottom panel, side panels and casters STEP 3 Attaching of glass shelf and cord holder 1. Securely insert the casters (× 4) into the bottom panel. Align the dowels of the side panels (left and right) with the dowel holes in the bottom panel and insert. Side panel (Left) Bottom panel Dowels Dowels Front Casters Dowel holes Side panel (Right) 1. Align the dowels in the glass shelf supports (left) (× 2) with the dowel holes in the side panel (left) and insert. Securely fasten with the glass shelf support fastening (×1). Attach the glass shelf supports (right) manner. in the same Side panel (Left) Glass shelf supports (Left) Dowel holes Dowel holes 3. [. . . ] Align the dowels of the side panels (left and right) with the dowel holes in the top crosspiece and insert. Securely fasten with assembly (× 4). screws Side panel (Left) The tools required: Plus (Phillips) (+) screwdriver Do not use electric powered screwdrivers. Position the glass shelf such that the caution label is on the top surface, on the near side. [. . . ]