User manual PANASONIC TY-FB9RT

[. . . ] Before connecting, operating or adjusting this product, please read these instructions completely. Please keep this manual for future reference. [. . . ] To Service personnel: Before removing or installing the Terminal Board, be sure to turn power of the display off and unplug the power cord plug from the supply outlet. Do not touch connector contacts with hands directly. â· To avoid electrostatic damage to internal parts, before handling this product touch a large metallic object such as a steel cabinet to discharge yourself. Be sure to use the supplied cable or specified parts for interconnection. To avoid malfunction or failure, do not use parts other than those recommended. Check to make sure that the following accessories are included in the Terminal board package: Terminal function label ( 1 sheet ) Terminal board replacement Instructions Of the display unit that are compatible with terminal board attachments. 2 slots model 3 slots model Slot1, Slot2 Slot1, Slot2, Slot3 Note: Only one Terminal Board can be installed on a display. The Ir Through Terminal Board is a function board that can re-output infrared signals received at the remote control receiver on the display. It enables devices such as DVD recorders or VCRs to be controlled when they are out of direct range of the remote control signal. Attach the Ir System cord in line with the position of the remote control receiver of your DVD recorder (or VCR, etc). [. . . ] â· Make sure that the Ir System cord attachment locations are completely free of dust and dirt before attaching the cord. â· Be careful when removing the Ir System cord from its attached location, as the double-sided tape has very strong adhesion that could damage the surface. [. . . ]