User manual PANASONIC TY-S37PA50W

[. . . ] Assistance may be required for some assembly procedures. CAUTION : THIS STAND IS DESIGNED ONLY FOR USE WITH A PANASONIC PLASMA TV. APPLIED MODEL : TH-42PX20, TH-50PX20 Use with other appliances may result in instability causing possible injury. STEP 2 To use with equipment such as a video deck Wire over the minimum distance · To thread wiring, remove the terminal cover and pass wires along the Your hardware pack contains / Replacement parts Assembly screws Glass shelf fastening screws Glass shelf support fastening screws (Black screws) ( × 4) Rear cord cover fastening screws (Black screws) ( × 3) (Back) THEA118 × 4 THEA102N × 8 Support pole fastening screws Assembly screws (Black screws) XST5+12 × 4 Cord clamps XYN5+F55FZ × 4 XSB4+12FZ × 7 grooves in the rear cord cover, along the groves in the left and right side panels, and along the groves in the cord holder under the glass shelf. [. . . ] APPLIED MODEL : TH-42PX20, TH-50PX20 Use with other appliances may result in instability causing possible injury. STEP 2 To use with equipment such as a video deck Wire over the minimum distance · To thread wiring, remove the terminal cover and pass wires along the Your hardware pack contains / Replacement parts Assembly screws Glass shelf fastening screws Glass shelf support fastening screws (Black screws) ( × 4) Rear cord cover fastening screws (Black screws) ( × 3) (Back) THEA118 × 4 THEA102N × 8 Support pole fastening screws Assembly screws (Black screws) XST5+12 × 4 Cord clamps XYN5+F55FZ × 4 XSB4+12FZ × 7 grooves in the rear cord cover, along the groves in the left and right side panels, and along the groves in the cord holder under the glass shelf. In such an instance, thread the wiring over the minimum distance, as indicated by the dotted line in the diagram. · After threading wiring, fasten with cord clamps (× 6) so that the cords do not protrude from the grooves. If there are any cord clamps left over, store them carefully. You will need them if you use the unit to house more equipment in the future. Support pole (Right) Support pole (Left) The top glass shelf is specifically for the center speaker and AV amp. If you place a video deck here, it may badly affect the picture. Cord clamps Power cord TBLA3196 × 1 TBLB3111 × 6 Casters (Wheels) TBLA3197 × 1 Glass shelf supports (Right) Glass shelf supports (Left) REPLACEMENT PARTS LIST TBLA3194 × 2 TBLA3195 × 2 TBLB3074 × 4 Replacement parts Screws Bottom cap (Right) Bottom cap (Left) TY-S37PA50W Qty. Description 1 TBLA0116 Top crosspiece 1 TBLH0548 Bottom panel 1 TBLA0104 Side panel (Left) Side panel (Right) 1 TBLA0103 1 TBLB3080 Rear cord cover 1 TKGA0127 Glass shelf 1 TBLA3184 Cord holder TY-S50PX20U Part No. TBLA0117 TBLH0550 TBLA0104 TBLA0103 TBLB3110 TKGA0129 TBLA3217 TBLB3107 × 1 TBLB3108 × 1 XTB4+10B × 4 When making a part (s) inquiry or for out of warranty purchases please quote part no. Insert a cord holder in parallel with the glass shelf supports (left and right), and align the dowels of the cord holder with the dowel holes in the glass shelf supports. Attach the other cord holder to the other glass shelf supports in the same manner. STEP 2 Top crosspiece Attaching of top crosspiece and rear cord cover Dowel / hole Glass shelf supports (left and right) Support pole fastening screws Support pole (Right) 1. Align the support pole (right) with the notch on the right side of the top crosspiece, and securely fasten with the support pole fastening (× 2) using a Phillips head (+) screws screwdriver. Fasten the support pole (left) to the left side in the same manner. Notches Rear cord cover Notches Cord holder Glass shelf Caution label 4. Attach the caution label to one glass shelf on the right side, facing the front. Insert the glass shelf in parallel with the grooves in the glass shelf supports (left and right), and securely fasten to the bottom of the (left and right) glass shelf supports using the glass shelf fastening screws (× 4). Fit the other glass shelf in the same manner. 2. Insert the rear cord cover fastening screws (× 3) into the screw holes on (black screws) the back of the top crosspiece and partially fasten. [. . . ] Fit the other glass shelf in the same manner. 2. Insert the rear cord cover fastening screws (× 3) into the screw holes on (black screws) the back of the top crosspiece and partially fasten. Slide the 3 notches in the rear cord cover behind the screws and securely fasten the screws. Assembly screws Side panel (Right) Rear cord cover fastening screws (Black screws) Glass shelf fastening screws Side panel (Left) The tools required: Plus (Phillips) (+) screwdriver Do not use electric powered screwdrivers. 3. [. . . ]