User manual PANASONIC TY-S50PX20U

[. . . ] Slightly lift the left and right sides of the plasma TV and remove the corner protection pads attached to the bottom. using assembly screws (black screws) (× 4) 2. Fasten the plasma TV and support poles Position by placing your hands at the points indicated in the illustration. Assembly Instructions TY-S42PX20U TY-S50PX20U Display stand Lift and remove The tools required: Support pole (Left) Corner protection pad Plus (Phillips) (+) screwdriver Support pole insertion hole Assembly screws (Black screws) Support pole (Right) IMPORTANT A study of the assembly instructions will not only save you time, but may prevent possible damage to your new stand. [. . . ] TBLA0117 TBLH0550 TBLA0104 TBLA0103 TBLB3110 TKGA0129 TBLA3217 TBLB3107 × 1 TBLB3108 × 1 XTB4+10B × 4 When making a part (s) inquiry or for out of warranty purchases please quote part no. & description. PANASONIC SERVICES COMPANY 20421 84th Avenue South, Kent, Washington 98032 Tel. : 1-800-833-9626 Fax : 1-800-237-9080 2003 Matsushita Electric Industrial Co. , Ltd. Unauthorized copying and distribution is a violation of law. To maintain appearance we recommend the following: Painted Surfaces:Use a damp cloth for cleaning. Do not use any abrasive or chemically treated cleaners. NOTE: As with all indoor furniture, this unit should not be exposed to direct sunlight, extreme temperatures or moisture, as this can result in serious irreparable damage. Panasonic Canada Inc. 5770 Ambler Drive, Mississauga, Ontario L4W 2T3 Tel. : (905) 624-8447 2003 Matsushita Electric Industeial Co. , Ltd. Unauthorized copying and distribution is a violation of law. For improvement purposes, design and specifications are subject to change without notice. TQZH507 Printed in Japan Assembly & Placement Manual TY-S42PX20U Model No. TY-S50PX20U Assembly STEP 1 Attaching of glass shelf and cord holder Attaching of bottom panel, side panels and casters STEP 3 1. Securely insert the casters (× 4) into the bottom panel. Align the dowels of the side panels (left and right) with the dowel holes in the bottom panel and insert. Align the dowels in the glass shelf supports (left) (× 2) with the dowel holes in the side panel (left) and insert. Securely fasten with the glass shelf support fastening (×1). screws (black screws) in the same Dowel holes Side panel (Left) Glass shelf supports (Left) Side panel (Left) Side panel (Right) Bottom panel Dowels Dowels Dowel holes 2. Attach the glass shelf supports (right) manner. Dowel holes Front Glass shelf support fastening screws (Black screws) Casters 3. Insert a cord holder in parallel with the glass shelf supports (left and right), and align the dowels of the cord holder with the dowel holes in the glass shelf supports. [. . . ] Align the dowels of the side panels (left and right) with the dowel holes in the top crosspiece and insert. Securely fasten with assembly (× 4). screws Position the glass shelf such that the caution label is on the top surface, on the near side. [. . . ]