User manual PANASONIC TY-ST08K

[. . . ] Before attempting to assemble these accessories, please read these instructions completely. Please retain this book for future reference. English Installation work should only be carried out by a qualified technician. [. . . ] During setting-up, make sure that all screws are securely tightened. ⷠIf sufficient care is not taken to ensure screws are properly tightened during assembly, the pedestal will not be strong enough to support the Wide Plasma Display, and it might fall over and become damaged, and personal injury may result. Use the accessory parts for fall-prevention to secure the Wide Plasma Display. ⷠIf the unit is knocked or children climb onto the pedestal with the Wide Plasma Display installed, the Wide Plasma Display may fall over and personal injury may result. Two people are required to install and remove the display. ⷠIf two people are not present, the display may be dropped, and personal injury may result. Leave a space of at least 3 15/16 inches (10 cm) at the top, left and right, at least 2 3/8 inches (6 cm) at the bottom, and at least 2 49/64 inches (7 cm) at the rear. ⷠDo not cover the air inlet holes at the bottom or rear of the display, or air outlet holes at the top, or a fire may result. 1) If the unit is placed in direct sunlight or next to a stove, the light and heat may cause discoloration or deformation. 2) Cleaning Wipe the unit with a dry cloth. If the unit is particularly dirty, clean it using a cloth soaked with water to which a small amount of neutral detergent has been added, and then wipe with a dry cloth. Do not use products such as solvents, thinner or household wax for cleaning, as they can damage the surface coating. (If using a chemically-treated cloth, follow the instructions supplied with the cloth. ) 3) Do not attach sticky tape or labels, as they can make the surface of the pedestal dirty. Be sure to connect the power plug to an easily accessible power outlet. ⷠEnsure there is free circulation of air around the equipment sufficient to keep the ambient temperature below 40°C. [. . . ] Screws Band Wood screws Wood screws Locate the wood screw at the center of the material width. * Securely attach to a wall, pillar or similarly solid structural feature using separatelyobtained products such as cords or chains of adequate strength. Voorbereidingen Met apart gemonteerde luidsprekers Klemmen Zonder apart gemonteerde luidsprekers Klemmen [. . . ]