User manual PANASONIC TY-ST42PX500

[. . . ] Do not use any television and displays other than those given in the catalogue. Otherwise the unit may fall over and become damaged, and personal injury may result. Do not climb up onto the pedestal or use it as a step. [. . . ] Leave a space of at least 100 mm (3 15/16 inches) at the top, left and right, and at least 70 mm (2 49/64 inches) at the rear of the plasma television. The television has air outlet holes at the top and air intake holes at the bottom and rear. These holes must not be covered, otherwise fire may result. When rotating the television, please turn it slowly and be aware of items in the surrounding area. Luck of caution may result in injury or damage. 1)If the unit is placed in direct sunlight or next to a stove, the light and heat may cause discoloration or deformation. 2) Cleaning Wipe the unit with a dry cloth. If the unit is particularly dirty, clean it using a cloth soaked with water to which a small amount of neutral detergent has been added, and then wipe with a dry cloth. Do not use products such as solvents, thinner or household wax for cleaning, as they can damage the surface coating. (If using a chemically-treated cloth, follow the instructions supplied with the cloth. ) 3) Do not attach sticky tape or labels, as they can make the surface of the pedestal dirty. Keep unneeded small parts and other objects out of the reach of small children. These objects can be accidentally swallowed. Insert the mains plug into a mains socket which is close and easily accessible for the plasma television. Provide adequate ventilation so that the temperature around the television does not rise above 40°C (104 °F). If there is insufficient movement of the air inside the display, heat may build up inside the television and fire may result. [. . . ] Wood screw Band * Use strong wire or chain which is commercially available to secure the plasma television to a solid area of the wall or a pillar. Black screw Band Screws on main body Front * Remove each rear screw indicated in the diagram above from the display main body and install a clamp. wood screw · Securing method Front Black screw Base Wood screw Clamp Screw into the middle of the back edge of a wood worktop. [. . . ]