User manual PANASONIC TY-TP42P10S

[. . . ] Operating Instructions Touch Panel Model No. TY-TP42P10S TY-TP50P10S TY-TP58P10S Before connecting, operating or adjusting this product, please read these instructions completely. Please keep this manual for future reference. English TQZH939-1 Accessories Before assembling, attaching and connecting anything, check all accessories have been included in the product package. USB cable 3 m (1) Ferrite core (1) Operating Instructions (8) · Japanese · English · German · French · Italian · Spanish · Russian · Ukrainian Mounting bracket A (2) Mounting bracket B (2) Vertical mounting bracket (2) CD-ROM (1) Driver software USB cable anchor (1) Mounting screw A (9) Mounting screw B (12) Touch pen (1) Velcro strip (1) (p. 7) Rubber feet (6)* (TY-TP42P10S) (TY-TP50P10S) *When you use anti glare filters (options), affix these rubber feet to the top of the existing rubber feet at the bottom of the right and left units. [. . . ] OK: Applies the setup to the operation and quits the setup panel. Select: Opens the "Please touch a touch screen" dialog box. If the touched panel is already registered, it appears in the combo box. Operation * : When you tick "Using Multi-monitor. " on the "Basic setting" tab, the "Multi monitor" tab and "Touch screen" will appear. 21 Touch Panel Setup (Explanation of Setup Panel Items) Touch setting This tab is for optimizing touch panel use. 29) Click action: This is the best setting if often using clicking operations (i. e. , web link clicks, etc. ). Drag action: This is the best setting if often using dragging operations (i. e. , drawing, electronic blackboards, etc. ). User setting: Applies the setup selected in the combo box. Default: Restores the setting made when the Driver software was first installed. Basic setting This tab is for making the basic settings for using the touch panel. Calibration (positioning): Aligns the touch position and cursor position. 27) Click mode: Sets the click operation used when touching the touch panel. 23) Using Multi-monitor: Select the "Using Multi-monitor. " checkbox to connect the touch panel with multiple monitors. Advanced: (p. 25, 26) 22 Touch Panel Setup (Explanation of Setup Panel Items) · Click mode Operation When the pen touches the touch panel, the computer reacts like the mouse button was held down. When the pen is lifted off the touch panel, the computer reacts like the mouse button was released. Moving the pen across the touch panel is like dragging. When the pen touches the touch panel, the computer reacts like the mouse was clicked. When the pen is moved across the touch panel, the cursor does not follow it. When the pen is lifted off the touch panel, the computer reacts like the mouse was clicked. When the pen is moved across the touch panel, the cursor does not follow it. When the pen touches the touch panel, the computer reacts like the mouse button was held down. When the pen is lifted off the touch panel, the computer reacts like the mouse button was released. When the pen is moved across the touch panel, the cursor does not follow it. When the pen touches the touch panel, the computer reacts like the mouse was clicked. Though the cursor follows the pen when moved across the touch panel, dragging is not possible. [. . . ] If the touch panel does not work after performing , or if the USB bandwidth error reappears, connect a USB 2. 0 hub to the USB port connected in . Then, connect the touch panel to that USB 2. 0 hub. · Even though a USB 2. 0 hub has multiple USB ports, usually only one touch panel can be connected to it. 42 Error Messages [Checking Your USB Host Controllers ] Select [Control Panel] [System] to open the Properties window and open the Device Manager window by clicking on [Device Manager] on the [Hardware] tab. Click on the "+" left of "Universal Serial Bus controllers". [. . . ]