User manual PANASONIC TY-TP50P8S
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual PANASONIC TY-TP50P8S. We hope that this PANASONIC TY-TP50P8S user guide will be useful to you.
Lastmanuals help download the user guide PANASONIC TY-TP50P8S.
Manual abstract: user guide PANASONIC TY-TP50P8S
Detailed instructions for use are in the User's Guide.
[. . . ] 3 Cautions when in use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Setup location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 If something abnormal happens . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] (See page 21) · If the infrared transmissive part of the screen is accidentally obstructed (such as by your finger) while connecting the USB, an element defect will be detected. If you use the system in that state, it may respond poorly to touch. If this happens, remove the USB cable and insert it again. You do not need to restart the computer. (1) (2) (3) (4) (5)
2
In order to prevent the USB cable from being pulled out, use the following procedure to attach the fixing bracket.
2
USB cable fixing bracket (accessory)
1 Hook the fixing bracket onto the rear of the touch panel.
USB
2 Line up the fixing bracket screw hole with the hole on the touch panel.
3 Fix the bracket in place using the fixing screw.
USB cable (accessory) 1
Pen
OF N FO
3 USB cable fixing bracket screw (accessory)
Installation of the USB driver In case of Windows 98 Second Edition (SE) . . . . . . . . . . . . page 12 In case of Windows Millennium Edition (ME) . . . . . . . . . . . . Then, the driver file is copied and setup.
12
Installation of the USB Driver
Setup is completed when all the files of the driver are copied. 8 The new hardware window is displayed again, and the driver for the assumed COM port is installed.
COM port number is confirmed with "Device Manager"
[Settings] [Control Panel] 1 Click on [Start] Double-click on "the system" icon of the control panel, and open the properties of the system.
The properties of the system are opened.
2 Then click on the "Device Manager" tab.
3 Double-click "Ports [COM&LPT]". Confirm that "USBSerial for Touch Panel V2 (COMx)" is found in "Ports [COM&LPT]". (COMx) is the COM port number for using a touch panel. As for the COM port number, the setup number varies in the use environment of the PC.
4 Next, double-click "Universal Serial Bus controllers".
5 Confirm that "MATSUSHITA USB-Serial Bridge for Touch Panel V2" is found in "Universal Serial Bus controllers".
6 Click on this button. The setup of the USB driver is finished.
17
Installation of the USB Driver
Install USB Driver
In case of Windows XP
First, PC is started, and then Windows is started. The CD-ROM with USB driver software is inserted into the CD-ROM drive. Next, touch panel and PC are connected with a USB cable. (see page 10) When a USB cable is connected, the wizard of the driver setup starts.
1 Click on this button.
Next, though the following warning message is indicated, there is no problem.
2 Click on this button.
A driver file is copied and set up.
Setup is completed when all the files of the driver are copied.
3 Click on the "Finish" button to close the wizard.
18
Installation of the USB Driver
COM port number is confirmed with "Device Manager"
[Settings] [Control Panel] 1 Click on [Start] Double-click on "the system" icon of the control panel, and open the properties of the system.
2 The properties of the system opens. Next click on the "Hardware" tab. Then click on the "Device Manager" button.
3 Double-click "Ports [COM&LPT]". Confirm that "USBSerial for Touch Panel V2 (COMx)" is found in "Ports [COM&LPT]". (COMx) is the COM port number for using a touch panel. As for the COM port number, the setup number varies in the use environment of the PC. The setup of the USB driver is finished.
19
Installation of the USB Driver
About the COM port
When it is set up, the USB driver is recognized as a COM port of the PC. Specify this COM number when you don't use an automatic connection. [. . . ] Fluorescent lamps: These are not a problem because they do not produce infrared light. Sunlight: This is not a problem if there is no direct exposure. Incandescent light bulbs: These require caution because they produce the most infrared light. Keep such light sources as far away as possible from the touch panel. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE PANASONIC TY-TP50P8S
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets...
In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual PANASONIC TY-TP50P8S will begin.
