User manual PANASONIC TY-WK15LT1U

[. . . ] They may become necessary when returning to the original installation condition. q Caution: This bracket intended for use only with Panasonic LCD TV Model TC-15LT1/TX-15LT2 series. Use with other apparatus may result in instability causing possible injury. Safety precautions Be sure to follow To prevent injury to the user and others and to prevent damage to property, items that must be followed are explained as shown below. [. . . ] 3 Use the supplied cable clampers to fix cables. Never fix cables using staples. Cautions concerning installation location s Avoid places with vibration and mount on a vertical surface with no vibration or shock. s Do not imbed the wide-screen LCD television, cover or block the vent holes. For the usage environment, the ambient temperature must be in the range of 5°C ~ 35°C, and humidity must be in the range of 5% ~ 90%. s Keep the wide-screen LCD television away from magnets, heat, steam, lampblack, etc. s Install in a location where the main unit power switch can be easily accessed and where the signals from the remote control may easily reach the television (about 6 m from the front). s About the installation location For the installation location of the wide-screen LCD television, thoroughly consult the following items with the customer. q The wide-screen LCD television is best viewed directly from the front. q Avoid areas where the florescent lighting reflects on the wide-screen LCD television surface. Although vertical angles can be adjusted, the mounting bracket does not move horizontally. q For the installation height, do not exceed the range of the connection cords (AC adapter, antenna, etc. ). Be sure to install in a location where the AC adapter is not suspended and where it can be placed on the floor, table, etc. q Install where there are no objects within 20 cm below the wide-screen LCD television. q Check the installation height, depth, wall structure, etc. , before performing installation work. Accessories Check for the following accessories before installing and connecting the wide-screen LCD television to the wall mounting bracket. [. . . ] Caution To prevent damage to the wall, make sure that the main unit is securely mounted on the notches of wall mounting bracket B (wall side) before letting go of the main unit. 2 8 9 Angle adjustment This wide-screen LCD television wall mounting bracket can be installed in 4 angles: 5° upsweep, vertical, 5° downsweep and 10° downsweep. Set the angle by adjusting the notches of wall mounting bracket B (wall side) and the concave section of wall mounting bracket A (main unit side) to the desired angle by referring to the diagrams below. 5° upsweep Upper notch Vertical Fixing hole Upper notch Fixing hole Lower notch Lower notch 5° downsweep Upper notch 10° downsweep Upper notch Fixing hole Fixing hole Lower notch Lower notch Angle fixing method To prevent the main unit from falling, fix the main unit using angle fixing screws (2 units) from both sides using the fixing holes located on wall mounting brackets A and B (main unit side and wall side). If the fixing holes of the brackets do not align, installation is insufficient. [. . . ]