User manual PANASONIC TY-WK22LT1U

[. . . ] They may become necessary when returning to the original installation condition. q Caution: This bracket intended for use only with Panasonic LCD TV Model TC-22LT1/TX22LT2 series. Use with other apparatus may result in instability causing possible injury. TQZH376 [Unit: mm] © 2002 Matsushita Electric Industrial Co. , Ltd. [. . . ] Thickness of at least 55 mm is required. * Use reinforcing plate or bar if the wall surface material is < board, plasterboard, particle board, > concrete, etc. , or if there is not enough mounting strength due to aging, etc. Prohibited 2 s Maintain space of at least 5 cm on top and to the sides of the wide-screen LCD television and at least 4 cm in the rear. Vent holes are located on the rear of the wide-screen LCD television. Blocking these holes may result in fire. s The wide-screen LCD television is heavy. Always work in pairs. The television may fall, causing bodily injury. 3 Use the supplied cable clampers to fix cables. Never fix cables using staples. 4 5 Accessories Cautions concerning installation location s Avoid places with vibration and mount on a vertical surface with no vibration or shock. s Do not imbed the wide-screen LCD television, cover or block the vent holes. For the usage environment, the ambient temperature must be in the range of 5°C ­ 35°C, and humidity must be in the range of 5% ­ 90%. s Keep the wide-screen LCD television away from magnets, heat, steam, lampblack, etc. s Install in a location where the main unit power switch can be easily accessed and where the signals from the remote control may easily reach the television (about 6 m from the front). s About the installation location For the installation location of the wide-screen LCD television, thoroughly consult the following items with the customer. q The wide-screen LCD television is best viewed directly from the front. q Avoid areas where the florescent lighting reflects on the wide-screen LCD television surface. Although vertical angles can be adjusted, the mounting bracket does not move horizontally. q For the installation height, do not exceed the range of the connection cords (AC adapter, antenna, etc. ). Be sure to install in a location where the AC adapter is not suspended and where it can be placed on the floor, table, etc. q Install where there are no objects within 20 cm below the wide-screen LCD television. q Check the installation height, depth, wall structure, etc. , before performing installation work. Wall mounting bracket B (wall side) (1) Check for the following accessories before installing and connecting the wide-screen LCD television to the wall mounting bracket. [. . . ] Align wall mounting bracket B (wall mount) holes with the flush nuts, and screw in the anchor bolts. Securely tighten the anchor bolts so that they do not become loose. If washers are necessary, use washers that cannot be removed from the screw holes of wall mounting bracket B or from the tip of the anchor bolts. 13 9a Bundling connector cables 1 Press down on the upper section of the clamper with your thumb and pull the edge using your index finger to remove the hook. 2 Bundle the cables and apply the clamper hook. 11 Hook Edge Fixing hole Fixing hole 9b Bundling cables below the connector Tip 1 Inner hole 2 Outer hole Clamp a single cable using the cable clamper and insert the tip into the inner hole. Bundle all cables and insert the tip into the outer hole. Example of clamped cables Clamper Cable clamper Lower notch Installation (mounting to wall) 10 Mount wall mounting bracket B (wall side) 1 2 12 Be sure to attach the fall prevention strings (2 units) on the hooks of wall mounting bracket B (wall side). [. . . ]