User manual PANASONIC UB8325

[. . . ] Operating Instructions With Installation Manual (for qualified service personnel) Electronic Board (Interactive Panaboard) Model No. UB-8325 Panaboard Stand is optional. · To assemble this unit, please refer to the Installation manual on page 83 through 99. · Before operating this unit, please read these instructions completely and keep them carefully for future reference. · Because of the nature of the print film, all the printed text will remain on the film. · This unit is designed for installation by a qualified servicing dealer. [. . . ] The buttons for saving image files or recording IPB documents are not showed. · Compact Display: Use the Compact Display when the Desktop Drawing Tool covers up too much of the image behind it. It keeps the part that is hidden to a minimum. Switching among their views can be done by clicking the (Shrinking) or (Expansion) buttons. Standard Display Marker Display · The Save As window appears. Enter the folder where you want to save the file and the file name. · The extension of the file is ". ipb". Click [Save]. Note · Do not change the Desktop resolution while recording data using method 1 or method 2. If changed, the Desktop image will not be displayed properly in the View window. · While using method 1 to record data, page numbers can be verified by (Page No. ) in the Desktop Drawing Tool. Before starting to record data, the data value is "0" and will change to "1" when (REC Start) is clicked. The value will then count up for each page break. When switching the computer screen being projected onto the screen of the Interactive Panaboard during a meeting, begin drawing after adding (New Page) and recording the background image of the new page. · While using method 2 to record data, the number of pages can be verified by (Page No. ) in the Desktop Drawing Tool. Before starting to record data, the data value is "0" and it will change to "1" when (REC Start) is clicked. The value will then count up each time the (REC Page) is clicked. · A maximum of 50 pages can be stored. Compact Display Note · Tools cannot be changed in the Compact Display view. · During PowerPoint Slide Show, the Standard Display and Marker Display views show (Next) and (Previous) icons. · To disappear the Desktop Drawing Tool, select a marker or eraser and press the projected screen with the Electronic Pen while pressing the pen button. To display the Desktop Drawing Tool again, locate the Electronic Pen at the desired place on the projected screen and press the projected screen with the Electronic Pen while pressing the pen button. 48 Using the Panaboard in Whiteboard Mode Using the Panaboard in Whiteboard Mode Starting the Interactive Panaboard Software 5 Click the Whiteboard icon and click [OK]. · The Whiteboard Window appears and the icon is registered in the Taskbar. Note · If the Interactive Panaboard is not detected, the notification window appears. In this case, check the status of the Interactive Panaboard and confirm that the USB cable is connected. [. . . ] Please purchase the appropriate wall-mounting hardware (sold in stores). Refer to page 98. Accessories No. Part name Wall-mounting fixture L Illustration Q'ty No. Part name Screw (Not use*) Illustration Q'ty 2 4 M4 x 16 mm (20/32") Wall-mounting fixture R 2 Wall-mounting template (Not use*) 1 Use the wallmounting template provided with UB-8325. Wing bolt M5 x 12 mm (15/32") (For mounting of the electronic board) 2 *These are used for other models. 96 Optional Wall-mounting Kit (KX-B063) Wall-mounting procedure 1 Confirm that the wall is strong enough to support the weight of the electronic board. Caution The wall must be capable of supporting at least 1, 005 N [103 kgf (227 lbs. )] for UB-8325. 2 3 Tape the Wall-mounting template on the wall. ·Do not use the template included in the wall-mounting kit (KX-B063), but rather the one included with the electronic board (UB-8325). ·When taping the template on the wall, make sure it is level. 1) Drill holes in the wall for the wall-mounting fixtures (8 holes total). ·Holes on the wall-mounting fixture are 7 mm (1/4") in diameter. 2) After removing the wall-mounting template, attach the wall-mounting fixtures with the appropriate wall-mounting hardware (two screws in each fixture). Wall-mounting template (See page 85. ) (provided with UB-8325) 812. 8 mm ( 2' 8") 1 Wall-mounting fixture L 2 Wall-mounting hardware* Wall-mounting fixture R 1 Wall-mounting fixture L 7 (2 0 m 3m /4 ") 50 mm (1 31/32") 762 mm (2' 6") Installation Wall-mounting hardware* 406 . 4 (16" mm ) Center of the electronic board * This hardware must be locally procured, it is not included in the kit. [. . . ]