User manual PANASONIC UF-140

[. . . ] The Telephone Line Cable Adapter is available in certain countries only. For some countries, the handset may not be available because of the country's regulation or specification. 2 Table of Contents Getting to Know Your Machine Main Unit and Accessories. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Precautions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] (See page 37) If the setting does not match with the ring pattern, your machine will not receive a document automatically and the telephone will continue to ring. Furthermore, if your TAM does not support the "Distinctive Ring Detector" service, it may not function properly in TAM Interface. 66 Receiving Documents Telephone Mode When your machine is set to this mode, your machine will not receive documents automatically. If you receive a fax call, follow the procedure below to receive documents manually. Setting the Telephone Mode 1 1 2 3a 3b Change Fax Parameter No. (See page 36) Operation of Telephone Mode When your telephone rings, lift the handset of the External Telephone. If you hear a beep from the phone, it means someone wants to send a fax. Or, if the caller answers and says he/ she wants to send a fax, then. . . Remove any document from the ADF. If you answered the call using the External Telephone, If you answered the call on an Extension phone, or within 1 second from the telephone key pad. (See Note 1) Your machine will be activated remotely. 4 NOTE Hang up the phone. 1. This procedure is called "REMOTE RCV" and will only work on a touch tone phone. If your extension phone is not a touch tone phone, press machine. Start on the control panel of your fax 67 Basic Operations Receiving Documents Fax / Tel Auto Switching Mode When your machine is set to this mode, your machine will switch to document reception or voice communication automatically. Setting the Fax / Tel Auto Switching Mode 1 1 2 1 2 3 4 Change Fax Parameter No. (See page 36) Operation of Fax / Tel Auto Switching Mode If it is a Fax call, Your machine will answer the call when a call is received, and then distinguish whether it is a voice or fax call. Thank you for calling. Silent Detection Mode Enables your Fax machine to switch to the Fax Mode when receiving from units that do not send fax signals (short beep) and prevents your TAM from recording blank (long silence) incoming message. Set the time length of the OGM recorded in your TAM with the Fax Parameter No. (See page 37) [We recommend setting the time length 5 or 6 seconds longer than the actual time length of the OGM. ] 71 Basic Operations Receiving Documents Print Reduction This machine can use Letter, Legal or A4 size plain paper for recording. Sometimes, oversized documents sent to you by the other parties cannot be printed on a single page. When this occurs, the document will be divided into separate pages. This machine is equipped with a Print Reduction function to solve this problem. You can select the most appropriate setting from the selections described below. Automatic Reduction Each page of a received document is first stored in the memory. Based on the document length, your machine will automatically calculate the suitable reduction ratio (70% to 100%) to print the entire document on a single page. If the received document is extremely long (Over 39% longer than the recording paper), the document will be divided into separate pages and printed without reduction. Fixed Reduction You can pre-determine the reduction ratio from 70% to 100% in 1% steps. [. . . ] Allows you to view the brief contents of the memory files through the LCD display without having to print the Memory File List. Allows you to view the brief contents of the journal through the LCD display without having to print the journal. 160 ITU-T Image No. 1 All specifications are based on the ITU-T Image No. 1 (The sample shown below is not to scale). 161 Appendix Index A ABBR. [. . . ]