User manual PANASONIC VB42050

[. . . ] Panasonic DBS 824 Section 700 Feature Operation a (Applies to CPC-S Version 3. 0 and CPC-M Version 3. 2) Doc. 550X03601A Version 3. 0/3. 2 Issued April 2000 Warning: This service information is designed for experienced repair technicians only and is not designed for use by the general public. It does not contain warnings or cautions to advise non-technical individuals of potential dangers in attempting to service a product. Products powered by electricity should be serviced or repaired only by experienced professional technicians. [. . . ] If another extension answers the call, the LED on the telephone will steadily light red. Revised April 2000 DBS 824-3. 0/3. 2-700 3-49 Line Appearances Key Telephone Features Operation Operation To originate a trunk call . . . To place a call on Exclusive Trunk Hold (page 3-29) . . . To place a call on System Trunk Hold (page 3-15) . . . The key blinks (green) as the call is made. Press HOLD, dial the destination extension, and then press PROG. Related Programming · FF1 (System): Least Cost Routing (LCR) Access · FF1 (System): Alert Tone for Busy Override and OHVA · FF1 (System): Extension Class of Service Setting · FF2 (Trunks): Pooled Trunk Access for Group "9" · FF2 (Trunks): Pooled Trunk Access for Group "81-86" · FF3 (Extension): Forced Least Cost Routing · FF3 (Extension): Extension Class of Service Assignment · FF3 (Extension): Busy Override Send · FF3 (Extension): Busy Override Receive · FF3 (Extension): Page Group (0-7) Extensions · FF5 (Keys): FF Key Assignments (all) · FF8 (LCR): LCR Setting (all) Considerations · Users can barge into a busy Direct Line (DL) and create a three-party conference. To barge into a busy Direct Line, the user presses the DL key. (The DL key will be lit red. ) · "Barge-in for Direct Lines" is controlled by the program settings for Busy Override. For instance, if an extension with a DL key does not want the DL broken into, that extension must have "Busy Override Receive" turned off. 3-50 DBS 824-3. 0/3. 2-700 Revised April 2000 Key Telephone Features Line Appearances · Both extensions must belong to the same paging group (1-7). · Barge-in for Direct Lines cannot override a DL under the following conditions: - When the DL is in a conference call - When the DL is holding a call. - When the phone that will be barged into is holding a trunk that does not appear on an FF key. For example, if extension 200 wants to barge into a DL that appears on extension 201, extension 200 cannot barge into the DL if 201 is holding a trunk that does not appear on an FF key. Multi-CO (MCO) Appearances (CPC-S and CPC-M) Description MCO keys will only ring for incoming calls if programed using the "Ring Assignments". When outside calls come in, the MCO key flashes green. If a second outdise cal comes in the a second MCO key flashes green. If another extensions answers an outside call, then the MCO key will stop flashing and becomes idle. You can make and receive CO line calls using a Multi-CO (MCO) key. An MCO key can be assigned to any of the pooled trunk groups. See "Pooled Trunk Access" on page 3-68 for more information. See "ML/MCO Separation" (page 3-53) for information on assigning both ML and MCO keys to the same system . Revised April 2000 DBS 824-3. 0/3. 2-700 3-51 Line Appearances Key Telephone Features Operation Operation To originate a trunk call To place a call on Exclusive Trunk Hold (page 3-29) To place a call on System Trunk Hold (page 3-15) To transfer a call Action Press an idle MCO key. The key blinks (green) as the call is made. Press HOLD, dial the destination extension, then press PROG. Related Programming · FF1 (System): Least Cost Routing (LCR) Access · FF2 (Trunks): Pooled Trunk Access for Group "9" · FF2 (Trunks): Pooled Trunk Access for Groups "81-86" · FF3 (Extension): Forced Least Cost Routing · FF4 (Ringing): Ringing and Hunt Groups (all) · FF5 (Keys): FF Key Assignments (all) · FF8 (LCR) LCR Settings (all) Considerations · When all trunks in a group are busy, all of the corresponding MCO keys light red. · If LCR is enabled, MCO keys can be assigned for trunk group 89. · There are seven groups of outside lines: 9 and 81-86. [. . . ] Recording continues until you hang up, you press the Call Record key again, or PanaVOICE stops recording due to a PanaVOICE time-out, lack of space, etc. In the event PanaVOICE stops recording during a conversation, a beep tone is emitted, the LED extinguishes and "Recording" disappears from the display. If the outside party hangs up first, you may continue recording call follow-up information. To retrieve a records: Once the call recording is complete, the recording is stored in your voice mail box as a new voice mail message. Operation Revised April 2000 DBS 824-3. 0/3. 2-700 C-1 3. 1 Features Update Appendix C PanaVOICE treats the recording message just as it would any other new message (lights the message waiting LED, displays MSG on your telephone, provides off site message notification, etc. ). [. . . ]