User manual PANASONIC VW-BN2

[. . . ] Before use, please read these instructions completely. Dear Customer, We would like to take this opportunity to thank you for purchasing this Panasonic DVD Burner. Please read these Operating Instructions carefully and keep them handy for future reference. please note that the actual controls and components , etc. [. . . ] (Excluding public holidays) Or go on line through our Internet Accessory ordering application at www. Most major credit and debit cards accepted. Also available through our Internet is direct shopping for a wide range of finished products, take a browse on our website for further details. interested in purchasing an extended guarantee?Please call 0870 240 6284 or visit our website www. Check the accessories before using this unit. AC adaptor VSK0692 AC mains lead A A K2CT3CA00004 United Kingdom, B Hong Kong Special Administrative Region of China and Saudi Arabia C B K2CJ2DA00011 Australia and New Zealand C K2CR2DA00004 Areas Other than United Kingdom, Hong Kong Special Administrative Region of China, Australia, New Zealand and Saudi Arabia Mini AB USB Connection Cable K2KZ59B00002 The unit is in the standby condition when the AC adaptor is connected. The AC mains lead is for use with this unit only. Do not use it with other devices or use the AC mains lead for other devices with this unit. The unit and the disc heat up during use. 1 2 3 4 Eject button [<] Access lamp [ACCESS] (P12) Disc insertion slot Power lamp [POWER] This indicator lights when the unit is connected to the AC mains supply. 0 V] Do not use any other AC adaptors except the supplied one. You cannot insert or remove a disc unless the unit is powered. If you connect this unit and a compatible Panasonic video camera, you can copy pictures recorded on the video camera to a DVD disc. Use the Mini AB USB Connection Cable to connect this unit and the compatible Panasonic video camera. This function does not work if the video camera is not compatible with this unit. Insert the disc with the recording/ playing side face down. The disc is automatically loaded when the disc is inserted all the way into the slot. Be careful not to touch the recording/ playback side of the disc when inserting/ removing it. When the unit accesses a disc, the access lamp lights up. The unit and the video camera will not operate properly if they are not inserted fully. Do not use any other USB connection cables except the supplied one. [. . . ] (Conducting the above operation when the access lamp is on may destroy the data on the disc. ) If normal conditions are not restored, detach from the connected power source and consult the dealer who you purchased this unit from. The disc will not eject unless this unit is powered. The [<] button may not work when copying from a connected video camera to a disc is in progress. [. . . ]