User manual PANASONIC VW-EC310E

[. . . ] ) No naked flame sources, such as lighted candles, should be placed on / above the set. 3) Do not remove the earthing pin on the power plug. This apparatus is equipped with a three pin earthing-type power plug. This plug will only fit an earthing-type power outlet. [. . . ] Furthermore, do not leave it for long periods in contact with articles made from rubber or PVC. 5 Safety Precautions 3D Safety Precautions WARNING Small Parts 3D Eyewear contains small parts (battery and specialised band , etc. ) and must be kept out of reach of small children to avoid accidental ingestion. English Disassembly Do not disassemble or modify the 3D Eyewear. CAUTION To enjoy 3D images safely and comfortably, please read these instructions fully. Use for commercial applications and public viewing Someone in authority should responsibly convey the precautions for use of the 3D Eyewear to the user. 3D Eyewear (sold separately) Do not drop, exert pressure on, or step on the 3D Eyewear. Be careful of the tips of the frame when putting on the 3D Eyewear. Be careful not to trap a finger in the hinge section of the 3D Eyewear. Pay special attention when children are using the 3D Eyewear. 3D Eyewear should not be used by children younger than 5 - 6 years old, as a guideline. Do not use any devices that emit the infrared signals near the 3D Eyewear, as this may cause the 3D Eyewear false operations. Do not use devices (such as mobile phones or personal transceivers) that emit strong electromagnetic waves near the 3D Eyewear as this may cause the 3D Eyewear to malfunction. Stop using the 3D Eyewear immediately if a malfunction or fault occurs. Stop using the 3D Eyewear immediately if you experience any redness, pain, or skin irritation around the nose or temples. In rare cases, the materials used in the 3D Eyewear may cause an allergic reaction. Note: Make sure that the AC cord is locked on both the left and right sides. Using the clamper Secure any excess cables with clamper as required. 1 Attach the clamper hole To remove from the unit: 2 Bundle the cables To loosen: snaps Insert the clamper in a hole. Keep pushing both side snaps hooks Set the tip in the hooks knob Keep pushing the knob 9 Connections Video equipment connection Terminals are on the bottom side of the Plasma Display. English SLOT: Terminal board (optional accessories) insert slot (see page 3) Note: SERIAL: Control the Plasma Display by connecting to PC 3D IR TRANSMITTER: Connect the 3D IR TRANSMITTER (optional accessory). The right side slot is for terminal board with 2-slot width. [. . . ] 17 English Customer’s Record The model number and serial number of this product can be found on its rear panel. You should note this serial number in the space provided below and retain this book, plus your purchase receipt, as a permanent record of your purchase to aid in identification in the event of theft or loss, and for Warranty Service purposes. OSD Language Day/Time Setup Display orientation Waarschuwingsbericht bij het inschakelen Wanneer u het toestel aanzet, wordt mogelijk het volgende bericht getoond: 3D-veiligheidsinstructies When 3D images will be viewed by unspecified number of people or used for commercial applications, someone in authority should convey the following precautions. These precautions should be followed in the home as well. [. . . ]