User manual PANASONIC WJ-MPU955

[. . . ] Admin Console User's Guide Model No. WJ-MPU955 Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future use. The contents of this document are subject to change without notice and do not constitute a commitment on the part of Matsushita Electric Industrial Co. , Ltd. Every effort has been made to ensure the accuracy of this document. However, due to ongoing product improvements and revisions, Matsushita Electric Industrial Co. , Ltd. cannot guarantee the accuracy of printed material after the date of publication, nor can it accept responsibility for errors or omissions. [. . . ] [3] If a record already exists with a matching value for any of these unique fields, that Target assignment will be skipped. [4] All other record values will be identical to the Source record. Click Yes to continue or No to cancel The copy source is the highlighted operator ID from which the subsequent operators will be copied. Enter the Target range of operator ID numbers, with the beginning number in the START box, and the ending number in the END box 4. Click the green check mark to add the series of operators, or click the red X to cancel After clicking the green check mark, a message will appear letting you know how many records were actually generated, indicating if any records were skipped. Operator IDs existing within the specified range will not be overwritten. The maximum number of operators that can be defined for the system is 512. The default password for replicated each operator is the same as the replicated operator's ID number. The default name for each replicated operator is "Operator #", where "#" is the operator's ID number. 90 Configuration Permissions Modify or copy operator permissions in the same manner described in the Camera Permissions section, beginning on page 57. The Controller permission tab allows an administrator to permit or deny an operator the ability to login to a specific controller. As with the Alarms window tabs, the Modes tab of the Operators window will be accessible only if Scheduled Modes have been selected. The Modes tab on the Operators window allows an administrator to determine what modes are active for an operator. By default, all four modes are active, even if all four have not yet been defined. This tab will be grayed out and inaccessible (as seen above) unless Scheduled Modes have been selected. See page 13 for full details on modes. 91 Configuration Automate MPU955 Admin Console allows operators to automate certain tasks, via the Automate menu on the main window. A sequence is a pre-determined series of views on one or several monitors, with preconfigured dwell times between views. Three different kinds of automated sequences are available so that frequently used combinations of monitors and cameras can be displayed automatically; tour sequences, group presets (not currently supported), and group sequences (not currently supported). An event is a scheduled action that will be automatically initiated at the time defined by an administrator. 92 Configuration Tour Sequences A tour sequence is an automated sequence of steps that can be run on any monitor by first activating the monitor, and then initiating the sequence. Each step in a tour consists of a specific camera aimed at a preset position, and a dwell time of a certain duration. The values entered in this window determine the sequence in which cameras are viewed by a single monitor when a tour is invoked. Although an operator will call sequences or presets by local number within a specific area, an administrator can view these tours by ID or area\local numbers within MPU955 Admin Console. Select the Tour Sequence command from the Automate menu 93 Configuration TOUR SEQUENCES- Definition Field Data ID Unique record ID assigned by MPU955 Admin Console as a tour sequence is added, in order to identify the programmed tour sequence to the system. MPU955 Admin Console automatically generates this number in consecutive order. [. . . ] 168 Permissions, Controller ­Alarm I/O . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 169 Permissions, Controller -CamControl . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 170 Permissions, Controller -CamView . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 171 Permissions, Controller ­Digital Recorder. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]