User manual PANASONIC WJ-420

[. . . ] 4 Trademarks and Registered Trademarks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Abbreviations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Terms Used in these Operating Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Recording/Playback/Live Image Transmission . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] [x2] button: Displays images with x2 zoomed size. [x4] button: Displays images with x4 zoomed size. Clicking a point in the zoomed image moves the zoomed image by positioning the clicked point as the center point. · When the [GO TO LAST] button is clicked while displaying live images, playback of the latest recorded images from the selected camera channel will start. 22 Display Images from Cameras on a 4-Screen Images from cameras will be displayed on a 4-Screen screen. Screenshot 1 Display the [Cam Select] tab. Step 1 Click the button of the [Multiscreen Select] box. Screenshot 2 Images from cameras will be displayed on a 4-Screen screen. Step 2 Up to 4 camera images can be displayed simultaneously on a 4-Screen screen. Each time the button is clicked, the camera picture is changed to quad display according to the settings made in [System] ­ [Basic Setup] ­ [Monitor Display Setup] of the setup menu (Advanced). Step 3 Click a camera title in the [Cam Select] tab or the camera title displayed on the image to return to a single screen display. Note: When the [GO TO LAST] button is clicked while displaying live images, playback of the latest recorded images from the selected camera channel will start. 23 Display Images in the Sequential Display Displayed images from cameras will be switched automatically. Camera images will be displayed sequentially according to the settings performed in advance. Screenshot 1 Display the [Cam Select] tab. Step 1 Click the button of the [Sequence] box. The lamp on the button lights (green) during sequence operation. The sequence action will start and the lamp on the button will light (green) during sequence operation. The "SEQ" indication will also light on the status display area. Screenshot 2 Live images will be displayed sequentially according to the settings performed in advance. Step 2 To stop the sequential display, click the button once again. The auto focus function is available by clicking the [Auto] button. · Brightness adjustment Adjust the brightness by clicking the [+] button or the [­] button in the [Brightness] box. Click the [Reset] button to reset the setting for the brightness. Registration of a camera direction on the preset position The current camera direction can be registered on the specified preset position. Registered preset positions can be used with a camera supporting the preset position function. Screenshot 1 Display the [CAM] tab. STEP1 Perform the pan/tilt operation to move the camera to the position to be registered. STEP2 Click the [i] button in the [Preset] box to select a preset number (1 - 256) to be registered. The selected preset number is used for registration. 26 Move a Camera to the Preset Position Moves a camera to the preset position registered in advance. Registering preset positions is required to perform the preset function. Refer to the operating instructions of the connected camera for the descriptions of how to register the preset position. It is impossible to register the preset positions of cameras using this unit. Screenshot 1 Display the [CAM] tab. Step 1 Click the [i] button in the [Preset] box to select a preset number (HOME, 1 - 256) to be moved. The camera moves to the registered preset position respective to the selected preset number. Auto mode Fuction (Auto Pan, etc) Moves a camera with an auto function set in advance. Screenshot 1 Display the [CAM] tab. STEP1 Click the [i] button in the [Auto mode] box to select a mode (Auto Pan, etc. ) to be started. Step 2 The auto mode function can be performed by clicking the [ON] button in the [Auto mode] box. [. . . ] Click the [Yes] button. ­ The following message is displayed on the information bar. "This site might require the following ActiveX control: 'WebVideo. cab' from 'Matsushita Electric Industrial Co. , Ltd'. Click here to install. . . " · Click the information bar and select "Install ActiveX Control. . . ". The "Security Warning" window will be displayed. Click the [Install] button on the displayed "Security Warning" window. ­ 64 Symptom Cause/solution Reference pages The following message is displayed on the information bar. [. . . ]