User manual PANASONIC WJ-FS216

[. . . ] Video Multiplexer WJ-FS216 Before attempting to connect or operate this product, please read these instructions completely ENGLISH VERSION For Australia THIS APPARATUS MUST BE EARTHED. To ensure safe operation the three-pin plug supplied must be inserted only into a standard three-pin power point which is effectively earthed through the normal household wiring. Extension cords used with the equipment must be three-core and be correctly wired to provide connection to earth. Wrongly wired extension cords are a major cause of fatalities. [. . . ] Press button 15 (SET) to finalize the character selection. The title is set, and the display returns to MENU 2 OF 3. Select "·" (space mark) to erase the character. To erase the title of a specific channel 1. Move the cursor to the channel number whose title is to be erased. Press buttons 13 (-) and 14 (+) simultaneously. 1. TITLE SETUP A title consisting of up to 8 alphanumeric characters can be displayed on the monitor. * MENU 2 OF 3 * TITLE SETUP * TITLE POSITION * TITLE DISPLAY STILL/ALARM DISP ON ON 2. TITLE POSITION You can select the position on the monitor where you want the title to be displayed. Move the cursor to POSITION in TITLE POSITION. 1. Move the cursor to SETUP in TITLE SETUP. * MENU 2 OF 3 * TITLE SETUP * TITLE POSITION * TITLE DISPLAY STILL/ALARM DISP * MENU 2 OF 3 * TITLE SETUP * TITLE POSITION * TITLE DISPLAY STILL/ALARM DISP ON ON ON ON 2. The TITLE POSITION setting is on stand by. The TITLE menu appears on the monitor. ** TITLE ** 1 1. . . . . . . . Move the cursor to the channel number whose title is to be edited by pressing buttons 9-12 (D, C, A, D B). Select the first character for the title by pressing button 13 (-) or 14 (+). Characters for the title can be selected from the following list: 3. Select the position where the title is to be displayed by pressing button 11 (A) or 12(B). You can A B select any of the 7 positions shown in the diagram above. Press button 15 (SET) to finalize the title position. The title position is set, and the display returns to MENU 2 OF 3. Note: All channel titles will be displayed in the same position. You cannot specify a different position for each title. ABCDEFGHIJKLM NOPQRSTUVWXYZÄÜÖÆÑÅØ 0123456789 =?'"#&()*+, -·/:;. (space mark) -10- 3. TITLE DISPLAY This parameter lets you decide whether or not to have the title displayed. [. . . ] The picture will stop at the edge of the monitor screen. ENTRANCE ENTRANCE Normal Camera Picture Normal Camera Picture STILL Picture with the "+" sign Still Picture (The word "STILL" blinks) Notes: · If you press the camera selection button for a camera whose picture is not displayed on the monitor screen, the operation is ignored. · The word "STILL" is not displayed if STILL/ ALARM DISP in MENU 2 OF 3 is set to OFF. Zoomed Picture -21- Notes: · When you change the multiscreen pattern (for example, quad to 3x3), the size of the zoomed picture is not the same even if the picture is from the same channel. · The title in the picture disappears when the ZOOM/MULTISCREEN/QUAD SHIFT button is pressed. The title remains off the screen even after the "+"· sign disappears. [. . . ]